Replacing A Headlight Bulb; Adjusting The Headlight Beam - Yamaha RS90NL Owner's Manual

ESU02082

Replacing a headlight bulb

1. Lift up the shroud.
2. Disconnect the headlight coupler.
3. Remove the bulb holder cover.
4. Unhook the bulb holder by pushing it in, then upward.
1 Bulb holder cover
2 Bulb holder
5. Remove the bulb.
WARNING
@
Keep flammable products and your hands away from
the hot bulb until it has cooled down.
@
6. Install the new bulb, and then hook the bulb holder
onto the headlight unit.
Bulb type: 12 V, 60/55 W
7. Install the bulb holder cover, and then connect the
headlight coupler.
CAUTION :
@
Keep oil and your hands away from the glass part of
the bulb or its life and illumination will be affected.
If the glass is oil stained, thoroughly clean it with a
cloth moistened with alcohol or lacquer thinner.
@
ESU03721

Adjusting the headlight beam

1. Lift up the shroud.
2. Insert a Phillips screwdriver into the hole under the
shroud to access the headlight beam adjuster 1.
3. Turn the headlight beam adjuster to adjust the head-
light beam.
Headlight beam movement:
a Down
b Up
8-34