Table of Contents
Advertisement
ESU04130
Rear suspension damping force remote adjust-
ment dial
Turn the remote adjustment dial to adjust the rear sus-
pension damping force. (See page 8-25 for adjustment
procedures.)
1 Rear suspension damping force remote adjustment
dial
ESU00039
Headlight beam switch
Push the headlight beam switch to change the headlight
beam to high or low.
1 Headlight beam switch
2 Push
3 High beam
4 Low beam
ESU04301
Auxiliary DC jack
The auxiliary DC jack is located in the front panel and
can be used for accessories.
NOTE:
@
The auxiliary DC jack cannot be used if the engine is not
running.
@
1. Start the engine.
2. Open the auxiliary DC jack cap 1, and then insert
the accessory power plug into the jack 2.
NOTE:
@
After using the auxiliary DC jack, be sure to remove the
accessory power plug from the jack and close the auxil-
iary DC jack cap.
@
5-11
Advertisement
Table of Contents
