Yamaha Grizzly YFM125GW Owner's Manual page 85

1. Maximum level mark
2. Minimum level mark
NOTE:
The engine oil should be between the minimum
and maximum level marks.
6. If the engine oil is at or below the minimum
level mark, add sufficient oil of the recom-
mended type to raise it to the correct level.
7. Insert the dipstick into the oil filler hole, and
then tighten the engine oil filler cap.
To change the engine oil
1. Place the ATV on a level surface.
2. Start the engine, warm it up for several min-
3. Place an oil pan under the engine to collect
1
4. Remove the engine oil filler cap, and then re-
2
1
1. Engine oil drain bolt
2. O-ring
3. Spring
4. Oil strainer
ECB00310
CAUTION:
When removing the engine oil drain bolt, the
compression spring, oil strainer and O-ring will
8-11
utes, and then turn it off.
the used oil.
move the engine oil drain bolt to drain the oil
from the crankcase.
4
3
1
2
10
11
1
2
3
4
5
6
7
8
9