Yamaha YFM35FGX Owner's Manual page 23

ECB00040
CAUTION:
Do not use the headlights with the engine
turned off for an extended period of time, oth-
erwise the battery may discharge to the point
that the starter motor will not operate properly.
If this should happen, remove the battery and
recharge it.
EBU28380
On-Command four-wheel-drive switch
"2WD"/"4WD"
This ATV is equipped with a switch to change from
two-wheel drive to four-wheel drive and vice-versa.
Select the appropriate drive according to the ter-
rain and the conditions.
G "2WD" (two-wheel drive): Power is supplied to
the rear wheels.
G
"4WD" (four-wheel drive): Power is supplied to
the rear and front wheels.
To change from two-wheel drive to four-wheel
drive, stop the ATV and push the switch in to the
"4WD" position. The four-wheel-drive indicator
light " " comes on.
To change from four-wheel drive to two-wheel
drive, stop the ATV and push the switch in to the
"2WD" position.
1. On-Command four-wheel-drive switch "2WD"/"4WD"
4-4
4