Related Manuals for Zanussi FL 502
Summary of Contents for Zanussi FL 502
-
Page 1: Washing Machine
WASHING MACHINE FL 502 AQUACYCLE 500 FL 502 60 - 90 30 - 60 30 - 60 30 - 40 30 - 60 30 - 40 30 - 40 30 - 60 60 - 90 uick MADE IN ITALY INSTRUCTION BOOKLET... - Page 2 Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged.
-
Page 3: Table Of Contents
Contents Warnings Maintenance Bodywork Disposal Door seal Detergent dispenser drawer Tips for environmental protection 5 Drain filter Water inlet filter Technical specifications Emergency emptying out Frost precautions Installation Unpacking Something not working? 20-21 Positioning and levelling Water inlet Water drainage Electrical connection Your new washing machine Description of the appliance... -
Page 4: Warnings
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • All internal packing must be removed before using • Leave the porthole door slightly ajar when the the appliance. -
Page 5: Disposal
Child safety • Children are often not aware of how dangerous • Keep all detergents in a safe place out of children’s electrical appliances can be. When the machine is reach. working, children should be carefully supervised • Make sure that children or pets do not climb into and not be allowed to play with the appliance. -
Page 6: Technical Specifications
Technical specifications DIMENSIONS Height 85 cm Width 60 cm Depth 54 cm MAXIMUM LOAD Cotton 5 kg Synthetics 2 kg Delicates 2 kg Woollens 1 kg SPIN SPEED 500 rpm max. POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz TOTAL POWER ABSORBED 2250 W MINIMUM FUSE PROTECTION 10 A... -
Page 7: Installation
Installation Unpacking Positioning and levelling Install the machine on a flat hard floor. All transit bolts and packing must be removed Make sure that air circulation around the machine is before using the appliance. not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen You are advised to keep all transit devices so that units. -
Page 8: Water Drainage
Water drainage Electrical connection This machine is designed to operate on a 220-230 V, The end of the drain hose can be positioned in three single-phase, 50 Hz supply. ways: Hooked over the edge of a sink using the plastic Check that your domestic electrical installation can hose guide supplied with the machine. -
Page 9: Your New Washing Machine
Your new washing machine This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The temperature selector dial will allow you to choose the most suitable temperature for your laundry. •... -
Page 10: Use
Control panel 5 Mains on light 1 Detergent dispenser drawer This light is on whilst the machine is operating and goes out at the end of the programme. 2 Half load button Select this button to reduce water consumption on 6 Programme selector dial the rinse cycle when washing a half load of cottons or linens. -
Page 11: Washing Hints
Washing hints Laundry weights The following weights are indicative: Sorting the laundry bathrobe 1200 g Follow the wash code symbols on each garment napkin 100 g label and the manufacturer’s washing instructions. quilt cover 700 g Sort the laundry as follows: sheet 500 g whites, coloureds, synthetics, delicates, woollens. -
Page 12: Detergents And Additives
Red wine: soak in water and detergent, rinse and Quantity of detergent to be used treat with acetic or citric acid, then rinse. Treat any The type and quantity of detergent will depend on residual marks with bleach. the type of fabric, load size, degree of soiling and Ink: depending on the type of ink, moisten the fabric hardness of the water used. -
Page 13: International Wash Code Symbols
International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not... -
Page 14: Operating Sequence
Operating sequence 4. Select option if desired Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with 5. Select the temperature the machine empty, in order to remove any manufacturing residue from the drum and tub. Turn the dial to the required setting. -
Page 15: At The End Of The Programme
7. At the end of the programme The machine stops automatically. The mains on light goes out. If you have selected a programme which ends with the water of the last rinse left in the tub, drain the water before opening the door selecting programme G or P. -
Page 16: Programme Table
Programme table Washing programmes for cotton and linen Max. load: 5 kg Possible Progr. Temp. Type of laundry Cycle description options Prewash Whites Wash at 60°-90°C 60°-90° with prewash 4 rinses (heavy soiled) Long spin Whites Wash at 60°-90°C 60°-90° without prewash 4 rinses (normally soiled) -
Page 17: Washing Programmes
Programme table Washing programmes for synthetics, mixed fabrics, delicates and wool Max. load: 2 kg, wool 1 kg Possible Progr. Temp. Type of laundry Cycle description options Prewash Synthetics Wash at 30°-60°C 30°-60° with prewash 3 rinses (heavy soiled) Stop with water in the tub Synthetics Wash at 30°-60°C 30°-60°... -
Page 18: Maintenance
Maintenance Bodywork Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the Clean the outside of the machine with soap and drawer after cleaning. water only. Rinse with clean water and dry with a soft cloth. -
Page 19: Water Inlet Filter
Water inlet filter Frost precautions If you notice that the machine is taking longer to fill, If the machine is installed in a place where the check that the filter in the water inlet hose is not temperature could drop below 0°C, proceed as blocked. -
Page 20: Something Not Working
Something not working? Problems which you can resolve yourself. Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. •... - Page 21 Problem Possible cause • Water is not visible in the • The machine, which is the result of modern technology, runs in a very economical way with low machine: water consumption. Performance is nevertheless excellent. If you are unable to identify or solve the problem, contact our service centre.