Engine Oil - Yamaha WOLVERINE YFM350FXR Owner's Manual

EBU00997

Engine oil

Engine oil level measurement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and then stop it.
3. Remove the engine oil filler cap, and then
wipe the dipstick off with a clean rag. In-
sert the dipstick in the filler hole without
screwing it in.
1. Dipstick
NOTE:
Wait a few minutes until the oil level settles
before checking.
_
4. Remove the dipstick, and then check the
oil level.
NOTE:
The oil level should be between the maximum
and minimum marks. If the level is low, add oil
to raise it to the proper level.
_
CAUTION:
Be sure no foreign material enters the
crankcase.
1. Maximum level mark
8-5
2. Minimum level mark