Yamaha SX150A Owner's Manual page 109

q
w
N
701063
OFF
ON
START
OFF
701022
If an engine fails to start, use the follow-
ing procedure.
1) Adjust the trim angle so that the
000891
2) Disconnect the Yellow/White emer-
1 CDI unit
2 Yellow / White cord
3) Open the throttle slightly without
N
4) Be sure the engine is in Neutral and
ON
START
5) Start the engine.
703045*
5-10
engine is vertical or trimmed in.
gency connector. The ignition timing
advance circuit of the microcomputer
is bypassed.
shifting using the neutral throttle
lever or the free accelerator.
After the engine starts, return the
throttle to the original position.
that the lanyard is attached to the
engine stop switch. The main switch
must be on.
E