Table of Contents
Advertisement
OPERATION
A. Switch On/Off the Product
1. Before turning on the system, please connect it according to
the System Connection Instruction.
2. Connect AC power supply with this product.
(Caution: Power source must be consistent with this product.)
(Caution: Power source must be consistent with this product.)
3. Press on the POWER switch button on the Rear Panel of the main
unit to switch on the system, the standby indicator will light up.
Then press the STANDBY button on the remote controller to enter
The normal status. Press the button on the remote controller once
again to keep power in standby status.
B. VOLUME Selection
1. Press the VOL+
Unit
or VOL + button on the remote controller to maximize
sound output.
2. Press the VOL-
unit
or VOL - button on the remote controller to minimize
sound output.
C. MUTE Selection
1. Press the MUTE button on the remote controller once to
keep the performance silent.
D. RESET
Press the RESET button on the remote controller and it will reset
all settings including Speaker output to Factory Default settings.
9
turn-knob
on the front panel of the main
turn-knob
on the front panel of the main
the
the
Advertisement
Table of Contents
