Listening To Music From An Auxiliary Device - VIETA IP20 Owner's Manual

Note: The operating time of every step shouldn't be longer than 5 seconds or it will
return to the original display.
If the unit is unplugged or if a power failure occurs, the preset stations will
not be erased.
Preset Tuning (Possible only after presetting stations)
Repeatedly press the
frequency will displayed.

Listening to music from an auxiliary device:

The unit includes a 3.5mm audio cable for connection to any analog music unit with a 3.
5mm output.
Caution: Disconnect the supplied FM antenna when using an audio cable.
1. Connect the auxiliary device to the unit using the supplied 3.5mm audio cable.
2. Press the button for 2 seconds or more. A LED will indicate that the unit is on.
3. Press the
4. Control music playback through the auxiliary device.
5. Adjust volume using the volume control knob on the front of the unit or +/- buttons
on the remote.
6. Press the button on the remote in playing mode, all sound will be muted. Press
the button again or +/- buttons on the remote or rotate the volume control knob on
the front of unit to resume sound.
( ) buttons to select the desired preset number. Its
BF
button repeatedly to select "
10
" source.