Safety Warnings You must observe local regulations when installing the display. Do not install anywhere that would permit the monitor to be viewed by the driver. You must also ensure you do not block the safety protection equipment such as airbags. Ask a qualified professional to install this display.
Precautions and General Warnings Do not place any excess pressure on the screen when opening, closing or adjusting it. It should be operated gently and slowly so as not to damage the screen. Ensure the screen is fully centered before closing it. Attempting the close the screen when it is at an angle will damage it.
Operating the Display Unit POWER: Switching the unit ON and OFF VOL -: Decrease Volume VOL +: Increase Volume MENU: Select button to access the on-screen OSD menu and adjustment selection AUX: Source selection IR SENSOR: There is an IN Sensor that receives the remote control commands and the wireless headphones at the front of the housing DOME LIGHT SWITCH: The built-in Dome Light has three...
Operating the Remote Control PWR: Turns the unit ON and OFF (AUX1. AUX2 switch) CH+: changes TV channels up CH-: changes TV channels down VOL+: Volume increase VOL-: Volume decrease MENU: On-screen menu access/exit OSD...
SmartView Swivel Mechanism Turn on the power supply Gently press the remote control or Warning The screen can be extended to a maximum angle of 105º. Pushing it beyond this point could Gently press the "Open" button. The screen will automatically open damage the device.
Page 8
SmartView Swivel Mechanism Turning off the device Before turning off the device, centre the screen and continue to push upwards to turn off the device fully. Warning Make sure the screen has been centered before pushing upwards to turn off the device fully or the device could be damaged.
Adjusting the Volume Adjusting the Volume Lighting (LIGHT) Gently press the Remote Control or press the "Vol +" button on the device to increase the volume On the Menu screen, select the 'LIGHT' option to begin adjusting the picture lighting. You can choose V.
Electrical Installation Wiring Diagram: Connect AUX1, AUX2 input channels to multiple media sound capabilities, e.g. DVD changer, DVD player, GPS and Digital TV etc. AUX3 Mini din input can allow easy connection to video and gaming facilities. Yellow Lead: Plugged into a socket that receives 12 V directly from the battery.
Specifications Power Requirement: IR headphone transmitting device: Channel tuning frequency: Power source: 12 V DC (from 10V 15.6 V) 2.3MHz 2. 8MHz (Stereo-sound) Consumption: IA (Maximum) Appropriate distance: > 2 m Standby: Under ImA (ACC OFF) Dimensions: Display Screen: Display Device: 260 mm x 190 mm x 27 mm (WxHxD) Monitor Size: 7 inches (16:9 wide) Remote Control Device: 126 mm x 45 mm x 22 mm...