Ipod Operation - VIETA VPC47IP Owner's Manual

5. iPod OPERATION

INSTALLING iPod INTO THE BUILT-IN iPod DOCKING
Always follow the below steps to install the iPod into the docking station.
Incorrect or improper installation may cause permanent damage to the
docking or the iPod unit.
Step 1
Press down the button as indicated
below to unlock the iPod docking.
Step 2
Pull out the iPod docking
as shown below.
Step 3
Press on these buttons
on both sides as
indicated below to unlock
the iPod holder.
Step 4
Pull out the iPod connector
as indicated below.
Press down
Pull out
Never pull out this stick unless
docking is completely release out.
Press down this button
Pull out this stick
Step 5
Once the stick is
completely pulled out,
user should see the
iPod connector,
and user can
connect
the iPod
to the
connector
as shown in this step.
Step 6
Push the stick & the connected iPod
inwards until it stops.
Step 7
Press the iPod holder on both sides
to hold the iPod firmly in place.
Step 8
Push the iPod docking inwards into
the unit's cabinent until a click sound
is heard.
E - 7
Press toward this
lock switch
Push inwards
P ress towards the iPod unit to hold the
i P od unit firmly in place
Push the docking back
into the Cabinent