IMPORTANT SAFETY NOTICE It is important to read and follow all the instructions and safety information contained in this Owner's Manual prior to use. Always wear a safety helmet (which is provided with each SNR scooter). Do not operate at night. Comply with all local laws and regulations.
The SNR is a recreational battery-operated vehicle. It is not a mobility device for medically prescribed use and should not be used as such. Always wear a helmet when riding the SNR. For your convenience and safety, EV Rider provides a helmet with each SNR scooter.
Mechanical Systems Check all joints, hinges and quick releases to ensure that the Stand N Ride is properly assembled. Stop using the product immediately if any joint, hinge or quick release becomes loose. Re-tighten the joint, hinge or quick release prior to resuming the ride. The electric motor, batteries and controls can get damaged if exposed to water.
Additional Safety Information Adjust the handle bar height to provide a comfortable and secure riding position on the Stand N Ride scooter. The rider's hands should be able to easily grasp the handle bar controls (throttle and brake lever). They should not be higher than the waist or lower to ensure proper posture and riding control of the unit.
Before You Ride Checklist Before riding the Stand N Ride electric scooter, be sure to carefully follow the checklist below: - Read and understand the Important Safety information section of your Owner’s Manual. - Make sure that the battery pack has been fully charged. - Check that the battery pack connection to the base frame is tight.
the unit and become proficient riding it. 7. Gradually apply the throttle until the desired speed is achieved. Once again, we recommend that you do not venture to full speed operation until you have become proficient with the scooter and only if you are certain that there are no obstacles in site on an open field.
Attempting to service or modify any of the scooter’s internal components may result in permanent damage to the scooter and will void the warranty. For service and repair, contact your nearest EV Rider dealer. It is always best to check before each ride the condition of the cables, brakes and folding latches to ensure their proper settings and tightness.
SPECIFICATIONS Model number SNR-1001 Color Black Textured ABS Plastic & Black Frame Overall length 992 mm / 36.3 in Overall width 642 mm / 25.3 in Ground clearance 75 mm / 3 in Weight capacity Without seat: 136kg / 300 lb With Seat: 113 Kg / 250 lb Component Weights: Base (With optional flat-free tires) 19.8 kg / 43.5 lb...
(The increase in operational noise level usually occurs due to abusive and excessive strain on the scooter.) Warranty service can be performed by EV Rider or by an authorized EV Rider service facility. Do not return faulty parts to EV Rider without prior consent. All transportation costs and shipping damage incurred while submitting parts for repair or replacement are the responsibility of the original purchaser.
Need help?
Do you have a question about the EV rider and is the answer not in the manual?
Questions and answers