Zanussi ZWG 3101 Instruction Booklet page 11

35.292.973...ZWG3101.qxd 01/06/2005 12:01 Página 34
5 "INICIO / PAUSA" button
(START/PAUSE)
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remains lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
6 "INICIO DIFERIDO 12H"button (DELAY)
This button makes it possible to delay the starting of
the washing programme by 12, 8, 4 or 2 hours. The
delay you have selected is indicated by the coming
on of the corresponding light. The machine begins
the countdown after depressing START/PAUSE
button.
You must select this option after you have setthe
programme and before you press the START
PAUSE button.
You can cancel the delay time at any moment,
before you press the START/PAUSE button. If you
have already pressed the START/PAUSE button,
and you wish to cancel the delay time, proceed as
follows:
• set the washing machine to PAUSE by pressing the
START/PAUSE button;
• press the INICIO DIFERIDO (DELAY) button once,
the light relevant to the selected delay goes off;
• press the START/PAUSE button again to start the
programme.
Important!
• The selected delay can be changed only after
selecting the washing programme again.
• The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
The delay start cannot be selected with SPIN
and DRAIN programmes.
7 Programme display
When you choose the delayed start, the light
relevant to the selected delay lights up.
After the machine has started, the remaining time is
shown by the corresponding indicator light.
LAVADO: when this light comes on this means that
the machine is performing the washing programme.
If you have selected the PREWASH option, this light
will be on during the prewash phase too.
FIN: when the programme has finished, the "FIN"
(END) pilot light comes on.
The "FIN" (END) light flashes in the event of
operating problems :
• 4 flashes: door open
• 2 flashes: problem with water draining
• 1 flash: problem with water supply
For more information see paragraph "Something not
working"?
8 Spin speed selector dial
"CENTRIFUGADO"
This dial allows you to reduce the final and the
intermediate spin speeds or to select the NO SPIN
option.
The speeds on the dial refer to cotton programmes.
Position 1000 corresponds to 900 r.p.m. for
synthetics and wool and 700 r.p.m. for delicates.
Position 500 corresponds to 400 r.p.m. for delicates
and 500 r.p.m. for synthetics and wool.
• NO SPIN : by selecting this option all the
spinning phases are suppressed. To be used for
extremely delicate items.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programme.
34