Be Safe - Easy-Bake 35229 Instruction Manual

Before you start baking, check out these simple
ELECTRICAL REQUIREMENTS:
120 Volts AC only - 60 Hz. 100 Watts
WARNING:
before removing light bulb door and changing light bulb. Do not use light
bulbs larger than 100 watts.
CAUTION:
edges. Care should be taken during installation of the light bulb. Phillips
screwdriver required for assembly.
DANGER:
water. Wipe clean with a damp cloth. We recommend that you periodically
examine the toy for potential hazards and that any potentially hazardous
parts be repaired or replaced.
(See back page for company contact information.)
ADULT SUPERVISION REQUIRED.
ALWAYS:
√ Hand-wash all pans and utensils before
using first time.
√ Wash your hands before using oven.
√ Use pan tool to move pans through
baking chamber.
√ Allow oven, pans and food to cool
before handling.
√ Unplug oven when not baking.
√ Use the correct type of light bulb.
Safety Tips and Cautions:
HOT
pans and food. Handle carefully!
HOT
oven interior, oven top and back. Do not touch!
NOTE: The "new" smell the oven gives off the first few minutes
is the protective oil evaporating from the metal parts in the
oven. You may also see a vapor. The oil is food-grade, nontoxic
and evaporates quickly. Do not immerse oven in water.

Be Safe

safety tips and reminders.
Shock hazard. Pull plug out of receptacle
Adult supervision required. Internal metal
To prevent electric shock, do not immerse oven in
NEVER:
x NEVER leave empty pans or pan tool in
oven!
x NEVER use plugged-in oven around
water at any time.
x NEVER leave plugged-in oven unat-
tended or unassembled.
x NEVER put your fingers in oven.
2