Use; Cleaning The Interior; Control Panel; Starting-Up - Zanussi ZV 130 E Instruction Booklet

USE

The freezer is marked with the
fresie food and long-term storage of frozen food.

Cleaning the interior

Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm
water and some neutral soap so as to remove the
typical smell of a brand-new product, then dry
thoroughly.
Do not use detergents or abrasive powders, as these
will damage the finish.

Control panel

Operating light
Thermostat knob for adjusting the temperature
SUPER indicator light

Starting-up

Insert the plug into the wall socket. Turn knob
beyond the "-16°C" position. The pilot light
light up to show that the appliance is working.
Freezer operation can be halted by turning knob
to position « ».

Temperature Regulation

To safely store frozen and deep-frozen foods, the
inner temperature of the freezer must be at least
-18°C or colder. Therefore, we suggest you turn the
knob to a medium setting (-18°C).
The temperature inside the freezer is automatically
adjusted to ensure safe storage of the food.
However, the exact setting should be chosen keeping
in mind that the temperature inside the refrigerator
depends on:
•
room temperature;
•
how often the door is opened;
symbol, which means that the compartment is suitable for freezing
C
-16
-24 -18
-22 -20
will
5
Fast freeze switch
Warning light
•
the quantity of food stored;
•
location of appliance.
Turn knob to the higher numbers to obtain lower
temperatures and, conversely, to the lower numbers if
a less cold temperature is required.

Quick freezing

Activate fast freeze by depressing the fast freeze
switch more than one second. The pilot lamp
will then light up. The SUPER function can be ended
manually at any time by pressing the button
The yellow light goes out.
If the fast freeze function is not ended manually, the
appliance electronics switch off the fast freeze
function after 48 hours. The yellow light
again.
goes out.