Instructions For The Installer; Technical Specifications; Installing The Appliance; Transportation, Unpacking - Zanussi Electrolux ZUF 1056 Instruction Book

Ins
Ins

Technical Specifications

Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption
Energy class, according to EU Standards
Freezing capacity (kg/24h)
Rising time (h)
Rated current (A)
Weight (kg)

Installing the appliance

Transportation, unpacking

The appliance and the interior fitting are protected for
transport.
Remove all packaging and any adhesive tape.
Any remnants of adhesive can be removed using
white spirit.
After transportation the appliance must not be
switched on for 2 hours. This is to allow the
refrigerant to settle.

Waste handling

Packing materials
The materials marked with are reusable.
>PE< PE= polyethylene
>PS< PS= polystyrene
>PP< PP= polypropylene
The packing consists of reusable materials only.
Cleaning
Clean the accessories and the inside of the appliance
with warm water and bicarbonate of soda (5 ml to 0.5
litres of water). Rinse and dry thoroughly.
Do not use detergents, abrasive powders, highly
perfumed cleaning products, wax polishes or
cleaning products containing bleach or alcohol.
tr uctions f
tr uctions f
(kWh/day)
(kWh/year)
or the Ins
or the Ins
ZUF 1056
100
80
595
850
635
0.575
210
A
9
13
0,5
40

Location

The appliance should be positioned in a well
ventilated, dry room.
Energy use is affected by the ambient temperature.
The appliance should therefore:
not be installed next to radiators, cookers or
other sources of heat
only be installed at a location where the ambient
temperature corresponds to the climate
classification, for which the appliance is
designed.
The climate classification can be found on the
rating plate.
The following table shows which ambient
temperature
classification:
Climate Classification Ambient Temperature
t aller
t aller
is correct for
SN +10 to +32 °C
N +16 to +32 °C
ST +18 to +38 °C
each climate
13