SENDO S251 User Manual page 33

Auto redial
When this function is activated, the phone
will automatically redial a number when the
call attempt fails. If the other user's phone is
busy, the phone will wait a few seconds
before each attempt, and then beep when it
succeeds.
Auto answer
This function is only applicable when certain
hands-free accessories (e.g., a personal
hands-free headset) are connected to the
phone. When you receive an incoming call
with this feature activated, the phone rings
three times before automatically accepting
the call.
Any key answer
When this function is activated, you can
answer an incoming call by pressing any
d
key, except , Reject.
Animations
It is possible to enable or disable animations
of the main menu.
☛
Note: when assigning downloaded
pictures to the main menu the menu
animations must be set to Off.
Security
Your PIN (Personal Identity Number) code is
a code that you can use to protect your
phone from unwanted users. This is the
number that the phone asks for at switch on.
PIN Code:
1 Activate PIN entry requirement at switch
on (if your SIM card supports this).
2 Deactivate PIN entry requirement at
switch on (if your SIM card supports this).
3 Change PIN.
4 Change PIN2.
Some network services require a separate
security code. This code is the PIN2. This
menu allows you to change the PIN2 code
that the mobile asks for when using certain
features. To activate the PIN code
requirement or change the PIN code, you
need to enter the current PIN code.
If you don't know your PIN code, contact
your service provider.
☛
Note: If you enter the wrong PIN code
three times, the SIM card is locked. You
must contact your service provider for
further instructions.
Shortcuts
To lock/unlock the keypad, press
*
from the main screen.
To enter/exit silent mode press
from the main screen.
To enter a pause while dialing press and
#
hold until the letter
insert a pause of 3 seconds.
33
g
, then
g #
then
p appears. This will
11