Page 1
HANDSFREE TELEPHONE WITH KEY LOCK USER MANUAL 862-02755...
Page 2
Do not allow magnetic objects to come into contact with the telephone receiver. Do not use strong or abrasive cleaning agents to clean the telephone. Use a soft damp cloth to clean the telephone. TANZANITE 130 SPEAKER TELEPHONE WITH KEY LOCK Figure 1: Phone Front View - 2 -...
Page 3
TANZANITE 130 SPEAKER TELEPHONE WITH KEY LOCK Figure 2: Phone Base The Tanzanite 130 telephone with its high-tech design and modular handset and cord, offers a range of advanced technological features. The Speed Dial facility allows you to store up to 3 telephone numbers (of up to 16 digits each).
Page 4
EQUIPMENT SUPPLIED One Tanzanite 130 Phone One Tanzanite 130 Handset One Line cord One Handset Curly Cord 2 x Keys - Keylock Comprehensive User Guide INSTALLING THE TELEPHONE To connect the telephone line Plug one end of the line cord into the LINE jack on the telephone and the other end into the wall socket (you will hear a click when the plug is inserted correctly).
Page 5
FEATURES HANDSFREE A loudspeaker and microphone in the base allow you to make a call and conduct a conversation without using the handset. Pressing the SPEAKER button puts the phone into “handsfree” mode. On completion, press SPEAKER again to end the call. MUTE Pressing the MUTE key during a call will disconnect the microphone, allowing you to have a private conversation without the other party hearing you.
Page 6
MAKING AND ANSWERING CALLS Lift the handset Listen for dial tone Dial the number Listen for ringing tone If the number you have dialed is busy or does not exist, you will hear a repeated tone (engaged) or a long continuous tone (number unobtainable). To make calls from a telephone connected to a PABX, consult your system manual.
Page 7
Lift the handset or Enter the PABX Press REDIAL to Press the Memory Press SPEAKER Press PROG access code enter a pause Enter number Press PROG key ( M1 to M3 ) PROG REDIAL PROG Dialing a Speed Dial number Dialing from One Touch Memories M1 to M3 Lift the handset or Press the Memory...
Page 8
To mount the phone against a wall, you need two screws (not supplied) with heads that fit into the keyhole slots in the bottom of the phone and wedge. b. Remove the wedge from the desk top position by pressing in on both ends to disengage the clips.
Need help?
Do you have a question about the Tanzanite 130 and is the answer not in the manual?
Questions and answers