Table of Contents
Advertisement
Using the Wink Self-Timer
Point the camera at a person and press the shutter button fully. The camera
will shoot approximately two seconds after it detects a wink.
What if a wink is not detected?
•
Wink a bit slowly.
•
A wink may not be detected if eyes are covered by hair or a hat, or when wearing
glasses.
Detecting a Face and Shooting (Smart Shutter)
Choose
.
Choose
in Steps 1 – 2 on
touch
.
, then touch Ú.
Touch
Compose the shot and press the
shutter button halfway.
Touch a face displayed on the screen to
choose a person to wink (Touch AF).
Confirm that a green frame appears
around the face of the person who will
wink.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Wink to take picture] will appear on
the screen.
The lamp will blink and the self-timer
sound will play.
Face the camera and wink.
The shutter will release approximately 2
seconds after a wink is detected from the
person inside the frame.
To cancel shooting with the timer after
countdown has started, touch the screen.
p.
64, then
77
Advertisement
Table of Contents
