Side Turn Signal Lights - Opel Owner's Manual

178 Vehicle care
4. Disengage sockets by turning and
remove. Press locking tabs on the
long sides of the bulb holder
outwards; lift bulb holder at front
end and remove.
5. Remove and renew the bulb.
Reverse light/brake light (1)
Reverse light (2)
Fog light, may be only on one side
(3)
Reverse light (4)
Turn signal light (5)
6. Insert bulb holder in bulb housing
by first inserting the lug at the front
of the plug. Fold together bulb
holder, ensuring that it engages
properly. Insert sockets and
engage by turning.
7. Fit seal on bulb holder. Ensure
that the seal is flat in the area of
the screws.
8. Engage plug. Insert bulb housing
in body, ensuring proper
positioning of the ball pins in the
recesses. Tighten the retaining
nuts.

Side turn signal lights

Have the bulbs replaced by a
workshop.