Removal steps of memory modules
When installing:
Note: If only one memory module is to be installed on the computer you are servicing, the memory module
must be installed in SLOT-0 (
Insert the notched end of the memory module into the slot. Press the memory module firmly, and pivot it
until it snaps into place. Ensure that it is firmly installed in the slot and does not move easily.
1040 Hard disk drive or solid-state drive
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 56
•
"1020 Bottom slot cover" on page 57
a
b
), but not in SLOT-1 (
).
.
Chapter 9
Removing or replacing a FRU
59