Front-Panel Information Display - Harman Kardon HK 3485 Owner's Manual

FRONT-PANEL INFORMATION DISPLAY

Mute
SPEAKER 1 MUTE
SPEAKER 2
Speaker 1/2
NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support
section for this product at www.harmankardon.com.
Speaker 1/2:
The dot to the left of the indicator for each speaker
pair will light when that pair is active. Press the Speaker 1/2 Selectors
to activate either or both pairs of speakers.
Messages:
This display shows messages relating to the status, input
source, tuner or other aspects of the HK 3485's operation.
Preset Number/Sleep Timer:
numbers indicate the specific preset memory location in use. When the
Sleep function is in use, these numbers show how many minutes remain
before the unit turns off.
Source Inputs:
The dot to the left of the name of the device that is
currently the source input for the HK 3485 will light.
When the device connected to the Tape Monitor Inputs has been
selected, the dot to the left of the Tape Monitor Input Indicator will flash
to indicate that you are monitoring a recording being made on the
device connected to the Tape Monitor Inputs, if the recorder has
off-head playback. The dot to the left of the Input Indicator for the
last-selected source input will remain lit.
Auto Tuned Stereo
AUTO TUNED STEREO
Messages
When the tuner is in use, these
Memory Preset Sleep
MEMORY
Preset Number/
Sleep Timer
Sleep Indicator:
This indicator lights when the Sleep function is in
use. The numbers in the Preset Number/Sleep Timer Indicators will show
the minutes remaining before the HK 3485 turns off.
Preset Indicator:
This indicator lights when the tuner is in use to
show that the Preset Number/Sleep Timer is showing the station's
preset memory number.
Memory Indicator:
This indicator flashes when entering presets
and other information into the tuner's memory.
Stereo Indicator:
This indicator lights when an FM station is being
tuned in stereo.
Tuned Indicator:
This indicator lights when a station is being received
with sufficient signal strength to provide acceptable listening quality.
Auto Indicator:
This indicator lights when the tuner's Auto Stereo
mode is in use.
Mute Indicator:
This indicator flashes to remind you that the
HK 3485's output has been silenced by pressing the Mute Button.
Press the button again to end muting.
PHONO VID 1
PRESET
SLEEP
FM VID 2
AM VID 3
CD TAPE M.
Source Inputs
9