Vax Power Reach V-015 Instruction Manual page 6

Vax V-015 User Guide.qxd
Vax V-015
Remove the lid of the dirt container (see Fig.4/3).
Fig.4/3
Firmly tap clean the HEPA filter (see Fig.4/4) until no more
dust is observed falling out.
Fig.4/4
6
dirt container and filter removal and replacement
22/9/06 12:17 Page 6
usage to avoid motor damage.
Cleaning the pre-motor filter
Behind the dirt container, just under the carry handle is a
pre-motor filter in the form of a small rectangle shaped
piece of foam. This can be cleaned in the same way as the
HEPA filter and can also be had washed under the cold tap.
The dirt container can be washed in lukewarm water (max
40°C). Do not use strong detergents and ensure dirt
container is fully dry before putting back in vacuum
cleaner.
WARNING: Always empty dirt container and clean
!
HEPA filter before each use and during prolonged
PLEASE NOTE: Let the filter dry out side the
!
vacuum for 24 hours before replacing / re-using.