Table of Contents
Advertisement
Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 23.
2
Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
3
Within 30 seconds, press the PRESET (
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the MEMORY/SET (MEMORY) but-
ton to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power lead become discon-
nected.
To recall a memorized station
Press the PRESET (
select the desired station.
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset
memory scan)
1 Press the PRESET (
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET (
station is located.
or
) button to
To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 While pressing down the
(SURROUND)/DEMO button, press the TUNING
"TUNER CL" appears.
26/4/05
or
) button for less than 0.5 seconds to
or
) button for more than 0.5 seconds.
or
) button again when the desired
PRESET
button and the X-BASS
button until
CD-SW200H(H)_EN.fm
TINSZA165AWZZ
CD-SW200H
ENGLISH
1
2
3
4
5
6
7
8
E-24
Advertisement
Table of Contents
