Table of Contents
Advertisement
Listening to a cassette tape
CD-MPX880H
(TAPE 1 or TAPE 2) (continued)
ENGLISH
Various tape functions
Function
Playback
Stop
Fast
forward/
Rewind
(TAPE 2
PRESET
only)
Caution:
To remove the cassette, press the
open the compartment.
Before changing from one tape operation to another, press the
(TAPE ) button.
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
E-25
Main unit
Remote
control
Press in the stop
mode.
Press in the
playback, fast
forward or rewind
mode.
Press in the
playback or stop
mode.
PRESET
(TAPE ) button, and then
Recording on a cassette tape
Before recording:
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
Operation
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or
CrO tapes.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the
erase-prevention tabs are not removed. Cassettes have
removable tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape
without the tab.
Side A
Tab for side A
Tab for side B
Advertisement
Table of Contents
