Sharp CD-MPX200W Operation Manual page 33

4
Within 10 seconds, press the
lect "ONCE SET" or "DAILY SET", and press the MEMORY
button.
5
Press the or
"REC", and press the MEMORY button.
White
The illustrations show the daily timer setting.
6
Press the or
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
7
Press the or button to adjust the minutes and
then press the MEMORY button.
8
Set the time to finish as in steps 6 and 7 above.
or button to se-
button to select "PLAY" or
Red
button to adjust the hour and
9
Switch input with the
press the MEMORY button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY
button.
If a station has not been programmed, "NO PRESET" will
be displayed and timer setting will be cancelled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
or button, and then
Continued to the next page
CD-MPX200W
CD-MPX500W
ENGLISH
E-32