Maintenance; Maintenance Schedule - Honda HS55 Owner's Manual

8. MAINTENANCE
The purpose of inspection and maintenance is to keep the snowblower in
the best operating condition.
Inspect or service as scheduled in the table below.
mml
Shut off the engine before performing inspection and
maintenance, and remove the spark plug wire from the-plug so the engine
cannot be started. If the engine must be run, make sure the area is well
ventilated. The exhaust contains poisonous carbon monoxide gas.
4
CAUTION:
l
Place the snowblower on 'a level surface before performing inspection
and maintenance.
l
Use only genuine HONDA parts or their equivalent. The use of replace-
ment parts which are not of equivalent quality may damage the
snowblower.
MAINTENANCE SCHEDULE
Throttle cable
Adjust
Drive belt
Check-Readjust
Friction disc rubber
Check
0 (1) (2)
0 (1)
(21
0 (1) 12)
Check
Fuel line
(Replace if Every 3 years (2)
necessary)
Valve clearance Check-Readjust
1 0 (2)
Fuel tank and filter screen
Clean
1 0 (2)
VOTE: (1) These parts may require more frequent inspection and replacement under heavy use.
(2) These items should be serviced by an authorized Honda dealer, unless the owner has the proper tools
and is mechanically proficient. See the Honda Shop Manuel for service information.
1
.F
24