Advertisement
5
Turn on your system
Press the ON/STAND-BY button.
If the power does not turn on, check whether the power lead is plugged
in properly.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
Note:
After the unit enters the power stand-by mode, wait a few seconds to
turn on again.
Playback on USB memory device
1
Remove the USB terminal cover. Connect the USB device. Press the
To select USB function, press the FUNCTION button (main unit) or AUX button (remote control) repeatedly.
2
Press the
or
button to select data types recorded in USB memory device.
3
Press ENTER button to choose folder types.
4
Select desired track to be played back by pressing
This function is only visible when connected to TV.
1
2
3
4
5
6
7
8
9
0
+10
1
4
7
0
,
Playing a disc
1
Press the DVD/CD button on the remote control or FUNCTION
button repeatedly on the main unit to select DVD/CD function.
2
Insert the disc into the disc slot, label side up.
The disc must be fully inserted into the disc slot before playing.
If "NO DISC" appears due to improper disc insertion, switch off the
AC power supply and then switch it on again.
8 cm disc can be inserted without an adaptor.
3
Some discs play automatically. If playback does not start, press
the
(DVD/CD
2
3
5
6
8
9
+10
(USB
,
or
. Then press ENTER or
12 cm (5")
) button.
) button.
(USB
) button.
1
2
3
4
5
6
7
8
9
0
+10
8 cm (3")
or
Advertisement
