Sharp AQUOS LC-46LE925RU Operation Manual page 16

Quick guide
E
Searching for cable broadcasts
To change each item to the appropriate
settings:
Press a/b to select the menu, and then
1
press ;.
Scrambled stations
Search method
Start frequency
Network ID
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
Press a/b/c/d or 0_9 to select or input
2
the appropriate item/value, and then press
;.
Press a/b to select "Search start", and then
3
press ;.
Press c/d to select "Yes" to start searching
4
cable broadcasts, and then press ;.
5
The TV searches for, sorts and stores all
the receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press 6.
After searching for DVB-C channels, the
screen switches to the "Satellite search"
setting (Page 15).
H
• The "Scrambled stations" menu and the "Search method"
menu are not displayed on the screen as each menu item is
fixed.
• The value of "Start frequency" and "Network ID" should be set
to the value specified by the cable provider.
14
[Yes]
[Channel]
[None]
Menu Description
Specifies if you
Scrambled
need to add pay-TV
stations
services.
Search Specifies how you
method search channels.
Start
frequency
Specifies the network.
Set this to register
only the specified
Network ID
network ID without
registering any special
services.
The symbol rates
are specified by the
Symbol rate
cable provider. Input
1* 1
the value received for
CATV.
The symbol rates
are specified by the
Symbol rate
cable provider. Input
1
2*
the value received for
CATV.
QAM
modulation 1
QAM
modulation 2
I Set up "Symbol rate 2" if the cable provider uses several
symbol rates.
J
When "Quick" is selected, "Scrambled stations" is automatically
set to "No".
J
When "Quick" is selected, "None" for the "Network ID" menu
cannot be selected.
H
• When you set "Sweden" in the country setting and select
"Cable" for the searching format, you can select the cable
provider "ComHem". Follow the screen prompts.
Analogue broadcast setting
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press 6.
After searching for analogue channels, the
screen switches to the "Satellite search"
setting (Page 15).
Selectable items
Yes, No
Channel: Extracts all
of information from a
channel (quick, but
needs corresponding
TV stations).
Frequency: Checks
every frequency in
range (slow).
2
Quick* : All services
are searched by
one frequency. This
menu works only
when your cable
provider provides
the frequency and
the network ID (e.g.,
Homing channel).
From 47.0_858.0
MHz
None, 0_65535
1000_9000
1000_9000
16, 32, 64, 128, 256
None, 16, 32, 64,
128, 256