Aquos Link Connection; Connecting An Aquos Bd Player Via The Aquos Audio Speaker System; Connecting An Aquos Bd Player; Aquos Link Setup - Sharp AQUOS LC-42D85X Operation Manual

AQUOS LINK

AQUOS LINK connection

First connect the AQUOS Audio speaker system or an AQUOS BD Player that supports the HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, fi rst turn on the power of the TV with all relevant
device's power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
Connecting an AQUOS BD Player via the AQUOS Audio
speaker system
HDMI cable
HDMI cable
AQUOS BD Player

AQUOS LINK Setup

AQUOS LINK Auto power on

If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "AQUOS LINK Setup",
3
and then press ENTER.
52
Optical AUDIO
cable
AQUOS Audio
speaker system
4
5
6
NOTE
• The factory default for this item is "Off".
Connecting an AQUOS BD
Player
HDMI cable
AQUOS BD Player
Press a / b to select "Auto Power On", and
then press ENTER.
Auto Power On
Setting auto power on by AQUOS LINK
Selecting Recorder
Using Genre Info.
On
Press c / d to select "On", and then press
ENTER.
Press MENU to exit.
Off