Tricity Bendix CWD1010 Operating And Installation Instructions page 14

WASHING 2 KG OF MIXED FABRICS AT 50°C
Suppose you have 2 kg of mixed fabrics to wash. They
are rather delicate fabrics and should not be washed at
a high temperature.
1 Load the laundry
P0004
2 Measure out the detergent
C0026
Pull out the detergent dispenser drawer from the control
panel. Measure out the amount of detergent required
and pour into the main wash compartment.
3 Add the fabric softener if required
C0024
4 Select the required option
Depress RINSE HOLD button, if desired.
14
Open the door by pulling
the catch outward.
Load the items one at a
time and close the door.
C0025
Pour the fabric softener, if
required, into the compart-
ment marked .
Do not exceed the MAX
level and then close the
drawer gently.
5 Select the required wash programme
M0017
6 Start the machine
Before starting up the machine check that:
the appliance is plugged in
the water supply taps are turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
MAINS
ON
T0006
7 At the end of the programme
The machine stops automatically.
If you have selected the RINSE HOLD option, the
machine will stop after the last rinse with the water left in
the wash tub, to prevent the fabric from creasing. To
drain the water release the RINSE HOLD button or
select programme 15.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF but-
ton again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
Turn the programme
selector dial clockwise to
the required programme .
Depress the ON/OFF but-
ton: the mains-on light illu-
minates and the machine
starts operating.