Table of Contents
Advertisement
SAVE THIS MANUAL
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product's serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.
IMpORTANT SAFETY
INFORMATION
In this manual, on the labeling, and
all other information provided with
this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
which, if not avoided, will result
in death or serious injury.
which, if not avoided, could
result in death or serious injury.
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
Page 2
DANGER indicates a
hazardous situation
WARNING indicates a
hazardous situation
cAUTION, used with
the safety alert
For technical questions, please call 1-800-444-3353.
related to personal injury.
used to address practices not
related to personal injury.
SAFETY WARNINGS AND
pREcAUTIONS
WARNING: When using helmet, basic
safety precautions should always
be followed to reduce the risk of
personal injury and damage to
equipment.
The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions and
situations that may occur. It must be
understood by the operator that common
sense and caution are factors which
cannot be built into this product, but must
be supplied by the operator.
Read all instructions before using
this helmet!
1.
Do not use the Welding Helmet if the
lens is cracked, if the lens or sensors
are dirty, or if the lens or front
retaining frame is loose.
2.
Keep work area clean
invite injuries.
3.
Observe work area conditions
not use welding helmets in damp or wet
locations. Do not expose to rain. Keep
work area well lit. Do not use auto-
darkening helmets in the presence of
flammable gases or liquids.
4.
Keep children away
never be allowed in the work area. Do
not let them handle this helmet.
NOTIcE is used to
address practices not
cAUTION, without the
safety alert symbol, is
. Cluttered areas
. Do
. Children must
Item 67854
91214
Advertisement
Table of Contents
