Sony SLV-D300P Operating Instructions Manual page 47

B Use this hookup if your A/V reciever has a Dolby Digital or DTS*
decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of
your AV amplifier (receiver). You are not able to enjoy the surround sound effects of
this player. You must make connections using
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
DVD-VCR
to LINE OUT L/R (AUDIO)
l: Signal flow
to audio input
[Speakers]
Rear (L) Subwoofer
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "On" in "Audio Setup" (page 50). Otherwise, no sound or a loud noise will
come from the speakers.
(red)
Stereo audio cord
(not supplied)
and
(white)
(white)
AV amplifier (receiver) having
a decoder
and
B-1 B-2
Coaxial digital cord
(not supplied)
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(red)
to coaxial or optical
digital input
Front (L)
.
to DIGITAL OUT
(COAXIAL or OPTICAL)
[Speakers]
Center
Front (R)
A/V Receiver hookup
47