Sony Dream Machine ICF-CD3iP Operating Instructions

4-115-539-32(1)
FM/AM CD
Clock Radio
Operating Instructions
ICF-CD3iP
Dream Machine is a trademark of Sony Corporation.
©2008 Sony Corporation Printed in China
WARNING
 To clean the casing, use a soft cloth dampened
with a mild detergent solution.
 Never touch the wire of the external FM aerial
To reduce the risk of fire or electric shock, do
during a thunderstorm. Furthermore,
not expose this apparatus to rain or
immediately disconnect the AC power cord
moisture.
from the radio.
To reduce the risk of fire, do not cover the
ventilation of the apparatus with newspapers, NOTES ON LITHIUM BATTERY
tablecloths, curtains, etc. And do not place lighted  Wipe the battery with a dry cloth to assure a
candles on the apparatus. good contact.
To reduce the risk of fire or electric shock, do not  Be sure to observe the correct polarity when
expose this apparatus to dripping or splashing, installing the battery.
and do not place objects filled with liquids, such
 Do not hold the battery with metallic tweezers,
as vases, on the apparatus.
otherwise a short-circuit may occur.
Do not install the appliance in a confined space,
Disposal of Old Electrical &
such as a bookcase or built-in cabinet.
Electronic Equipment (Applicable
in the European Union and other
As the main plug is used to disconnect the unit
European countries with separate
from the mains, connect the unit to an easily
collection systems)
accessible AC outlet. Should you notice an
This symbol on the product or on its packaging
abnormality in the unit, disconnect the main plug
indicates that this product shall not be treated as
from the AC outlet immediately.
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
Notice for customers: the following
of electrical and electronic equipment. By
information is only applicable to equipment
ensuring this product is disposed of correctly, you
sold in countries applying EU directives
will help prevent potential negative consequences
The manufacturer of this product is Sony
for the environment and human health, which
Corporation, 1-7-1 Konan, Minato-ku, Tokyo,
could otherwise be caused by inappropriate waste
Japan. The Authorized Representative for EMC
handling of this product. The recycling of
and product safety is Sony Deutschland GmbH,
materials will help to conserve natural resources.
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For more detailed information about recycling of
For any service or guarantee matters please refer
this product, please contact your local Civic
to the addresses given in separate service or
Office, your household waste disposal service or
guarantee documents.
the shop where you purchased the product.
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
WARNING
collection systems)
 Danger of explosion if battery is incorrectly
This symbol on the battery or on the packaging
replaced. Replace only with the same or
indicates that the battery provided with this
equivalent type.
product shall not be treated as household waste.
 Replace the battery for the clock backup with a
By ensuring these batteries are disposed of
Sony CR2032 lithium battery, and the battery
correctly, you will help prevent potentially
for the remote commander with a Sony CR2025
negative consequences for the environment and
lithium battery. Use of another battery may
human health which could otherwise be caused
present a risk of fire or explosion.
by inappropriate waste handling of the battery.
 Battery may explode if mistreated. Do not
The recycling of the materials will help to
recharge, disassemble or dispose of in fire.
conserve natural resources.
 Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as In case of products that for safety, performance or
sunshine, fire or the like for a long time. data integrity reasons require a permanent
 Dispose of used battery promptly. Keep away connection with an incorporated battery, this
from children. battery should be replaced by qualified service
staff only. To ensure that the battery will be
"CAUTION-CLASS 1M INVISIBLE LASER
treated properly, hand over the product at end-of-
RADIATION WHEN OPEN AND
life to the applicable collection point for the
INTERLOCKS DEFEATED DO NOT VIEW
recycling of electrical and electronic equipment.
DIRECTLY WITH OPTICAL INSTRUMENTS"
For all other batteries, please view the section on
how to remove the battery from the product
Features safely. Hand the battery over to the applicable
collection point for the recycling of waste
batteries.
 Brightness control (High/Mid/Low)
 Supplied audio cable for digital music players
For more detailed information about recycling of
 Built-in CD player with CD-R/RW playback
this product or battery, please contact your local
function Civic Office, your household waste disposal
 FM/AM 2-band digital tuner
service or the shop where you purchased the
 30 Station Presets (20 FM, 10 AM)
product.
 Automatic Time/Daylight Saving Time Setting
 No Power No Problem Alarm System
If you have any questions or problems concerning
 Extendable Snooze time from 10 to 60 min
your unit, please consult your nearest Sony dealer.
Precautions
Troubleshooting
 Play the unit on the power source specified in Should any problem persist after you have made
"Specifications". the following checks, consult your nearest Sony
 To disconnect the AC power cord (mains lead), dealer.
pull it out by the plug, not the cord.
The clock flashes "12:00" due to a power
 The unit is not disconnected from the AC
interruption.
power source (mains) as long as it is connected
 The battery is low. Replace the battery. Remove
to the wall outlet, even if the player itself has
the old battery and install a new one.
been turned off.
 The nameplate and important information The CD, radio, iPod or buzzer alarm does not
concerning safety are located on the bottom sound at the preset alarm time.
exterior.  Check that "ALARM A" or "ALARM B" is
 Since a strong magnet is used for the speaker, properly displayed.
keep personal credit cards using magnetic coding
The CD, radio or iPod alarm is activated but
or spring-wound watches away from the unit to
no sound comes on at the preset alarm time.
prevent possible damage from the magnet.
 Has VOLUME been adjusted?
 Do not leave the unit in a location near a heat
source such as a radiator or airduct, or in a The CD player does not operate.
place subject to direct sunlight, excessive dust,  Did you close the CD compartment lid?
mechanical vibration, or shock.  Did you insert the disc correctly?
 Allow adequate air circulation to prevent The disc should be inserted with the label side
internal heat build-up. Do not place the unit on up.
a surface (a rug, a blanket, etc.) or near  Dusty or defective disc — Clean the disc with
materials (a curtain) which might block the an optional cleaning cloth. Wipe the disc from
ventilation holes. the center out.
 Should any solid object or liquid fall into the unit,  Take out the CD and leave the CD
unplug the unit and have it checked by qualified compartment open for about an hour to allow
personnel before operating it any further. condensation to evaporate.
Compatible iPod models
There is no sound from the iPod.
 Make sure the iPod is securely connected.
The compatible iPod models are as follows.
 Adjust the VOLUME.
Update your iPod to use the latest software before
The iPod cannot be operated with this unit.
you use it.
 Make sure the iPod is securely connected.
The iPod cannot be charged.
 Make sure the iPod is securely connected.
When daylight saving time begins, the clock
does not employ the daylight saving time
iPod nano 3rd
automatically.
generation (video)
 Make sure the clock is set correctly.
 Press and hold CLOCK and BRIGHTNESS iPod classic
iPod touch
simultaneously for at least two seconds to
employ the DST function.
Specifications
iPod nano 2nd
CD player section generation iPod 5th
iPhone (aluminum) generation (video)
System
Compact disc digital audio system
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 µW(This output is
the value measurement at a distance of 200 mm
iPod nano 1st
from the objective lens surface on the optical
generation iPod 4th generation iPod 4th
pick-up block with 7 mm aperture.)
(color display) generation
Number of channels
2
Frequency response
20 - 20 000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
iPod mini
iPod section
Notes
DC out: 5V
 In these Operating Instructions, "iPod" is used
MAX: 500mA (AC only)
as a general reference for the iPod functions on
Radio section
the iPod and iPhone, unless otherwise specified
Frequency range
by the text or illustrations.
 The connector of the unit is for sole use for
Band Frequency Channel step
iPod. When you use devices that do not match
FM 87.5 – 108 MHz 0.05 MHz with the connector, connect to the AUDIO IN
terminal of this unit with the supplied audio
AM 531 – 1 611 kHz 9 kHz
connecting cable.
General  Sony cannot accept responsibility in the event
that data recorded to iPod is lost or damaged
Time display
when using an iPod connected to this unit.
12-hour system
Speaker
Connecting the aerial
Approx. 3.8 cm (1 / inches) dia. 20 Ω
1
2
Input
AUDIO IN jack (ø 3.5 mm stereo minijack) To connect the AM loop
Power output
aerial
1 W + 1 W (at 10% harmonic distortion)
Power requirements The shape and the length of the aerial is designed
230 V AC, 50 Hz to receive AM signals. Do not dismantle or roll up
For clock back up: 3 VDC one CR2032 battery the aerial.
Dimensions
1
Remove only the loop part from the
Approx. 145 × 156.8 × 115.8 mm (w/h/d)
plastic stand.
(5 3 / × 6 1 / × 4 5 / inches) not including
4 4 8
2
projecting parts and controls Set up the AM loop aerial.
Mass
Approx. 1.3 kg (2 lb 13 oz) including power
supply unit
Supplied accessories
Remote commander (1)
AM loop aerial (1)
Audio connecting cable (1)
3
Connect the cords to the AM aerial
Universal dock adapter for iPhone (1)
terminals.
Design and specifications are subject to change
Cord (A) or cord (B) can be connected to
without notice.
either terminal.
Insert the cord while
pushing down the
terminal clamp.
Only insert up
to here.
B
A
4
Make sure the AM loop aerial is
connected firmly by pulling softly.
Adjusting the AM loop aerial
Find a place and an orientation that provide good
reception.
 Do not place the AM loop aerial near the unit
or other AV equipment, as noise may result.
Tip
Adjust the direction of the AM loop aerial for best
AM broadcast sound.
 


The CD, iPod & iPhone  and
VOLUME + buttons have a tactile dot.



CR2032


CR2025
Preparing the remote About the backup
commander battery
Before using the card remote commander for the To keep good time, this unit contains one CR2032
first time, remove the insulation film. (See Fig. battery inside of the unit as a backup power
-)
source.
The battery keeps the clock operating in the event
When to replace the battery
of a power interruption.
With normal use, the battery (CR2025) should
Note for customers in the UK
last for about six months. When the remote
The clock is preset at the factory, and its memory
commander no longer operates the unit, replace
is powered by the preinstalled Sony CR2032
the battery with a new one. (See Fig. -)
battery. If the "AM 12:00" appears in the display
when the unit is connected to AC outlet for the
Notes
first time, the battery may be weak. In this case,
 Do not charge the battery.
consult a Sony dealer. The preinstalled CR2032
 When you are not going to use the remote
battery is considered part of the product, and is
commander for a long time, remove the battery
covered by the warranty.
to avoid any damage caused by leakage and
You are required to show "Note for customers in
corrosion.
the UK" (in this instruction) to a Sony dealer in
order to validate the warranty for this product.
Knowing when to replace the
battery
When the battery becomes weak, "" appears in
the display.
If a power interruption occurs while the battery is
weak, the current time and alarm will be
initialized.
Replace the battery with a Sony CR2032 lithium
battery. Use of another battery may cause a fire or
explosion.
Note
If "12:00" flashes in the display when the unit is
connected to AC outlet for the first time, the
battery may be weak. In this case, consult your
Sony dealer.
Replacing the battery
1
Open the CD compartment lid. (See Fig.
-)
2
Keep the AC plug connected to the AC
outlet and use a screwdriver to remove
the screw that secures the battery holder
at the bottom of the unit. (See Fig. -
)
3
Push the exhausted battery out from the
bottom of the battery holder and insert a
new battery with the  side facing up.
(See Fig. -)
4
Insert the battery holder back into the
unit and secure it with the screw. (See
Fig. -)
5
Press CD, iPod&iPhone, RADIO BAND,
AUDIO IN or SNOOZE/DATE/SLEEP
OFF to turn " " off in the display.

If the time in the display is
incorrect after the battery is
changed (Reset)
Press the Reset button with a pointed device. The
Reset button is in the small hole located in the
battery compartment.
Note
If you replace the battery, do not disconnect the
plug from the AC outlet. Otherwise, the calendar,
current time, alarm and station presets will be
initialized.
Battery Warning
If the unit is to be left unplugged for a long time,
remove the battery to avoid undue battery
discharge and damage to the unit from battery
leakage.
WARNING
There is a danger of explosion if the battery is
incorrectly replaced.
Replace only with the same or equivalent type
recommended by the equipment manufacturer.
If the battery compartment lid comes off
The battery compartment lid is designed to come
off when opened with excessive force. To put it
back on, see the illustration.
1
Insert the left hook of the lid into the left
hole in the unit.
2
Insert the right hook into the right hole.
3
Confirm the lid is securely attached.