Harbor Freight Tools 66687 Set Up And Operating Instructions Manual page 10

will have ten seconds to program the
Sleep Timer, otherwise the LED will
blink four times and exit the program.
7. Be sure to leave the Remote aimed at
the TV. Once the Sleep Timer is set,
you can continue to use the Remote
without altering the Sleep Timer.
8. Please remember that the Remote
must remain in TV mode for the
Sleep Timer to activate.
9. To cancel the Sleep Timer, press and
release the Sleep Button and the
ON/OFF Button. This will reset the
program to zero. The LED will flash,
stating the time has been reset to
Zero.
Page 10 For technical questions, please call 1-800-444-3353. SKU 66687