Dual Tone Multi-Frequency Tones; Hands-Free Phone; Making A Call; Using The Digit Dial Command - Chevrolet Volt 2013 Infotainment System

The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. Turn and press the TUNE/MENU
knob and select Enter Number.
2. Enter the phone number,
or select Enter Number on the
screen and select digits, then
press OK.
To use voice recognition, press the
/ button on the steering wheel.
Use the commands below for the
various voice features. For
additional information, say Help
while in a voice recognition menu.
Calls can be made using the
following commands.
These commands can
be used interchangeably to dial a
phone number.
This command allows a
phone number to be dialed by
entering the digits one at a time.
This command dials the
last number used on the cell phone.
To call a number:
1. Press . The system responds
Please Say a Command,
followed by a tone.
2. Say Dial or Call.
3. Say the entire number without
pausing, followed by Dial.
Once connected, the person called
will be heard through the audio
speakers.
To call using a name tag:
1. Press . The system responds
Please Say a Command,
followed by a tone.
2. Say Dial or Call and then say
the name tag. For example Call
John at Work.
Once connected, the person called
will be heard through the audio
speakers.
This allows a phone number to be
dialed by entering the digits one at
a time.
1. Press . The system responds
Please Say a Command,
followed by a tone.
2. Say Digit Dial.
3. Say each digit, one at a time, to
dial. After each digit is entered,
the system repeats back the
digit it heard followed by a tone.
After the last digit has been
entered, say Dial.