Chevrolet Acadia 2012 Manual page 13

6. Select one of the available
preset destination screen
buttons. A map screen, with the
destination marked, appears and
the system immediately begins
to route to that destination.
The preset destination buttons
overwrite and provides guidance
to the selected destination even
if the guidance is in place.
Pressing a preset destination
cancels the current route and
then, routes to the single preset
destination.
If more waypoints or stops are
desired after the preset is used,
follow the adding stopover
method to load a total of four
waypoints.
7. Select the route preference for
Fastest, Shortest, or Other. The
system calculates and highlights
the route.
8. Press the Start Guidance
screen button. The fastest route
automatically begins if the car
starts moving forward.
See Preset Destination under
information.
Canceling Guidance
Guidance is canceled once you
arrive at your final destination. To
cancel guidance prior to arrival at
the final destination:
1. Press DEST.
2. Press the Cancel Guidance
screen button.
3. A pop-up confirmation appears.
Press OK to cancel guidance or
press Cancel to cancel the
request.
Guidance Volume
To adjust the volume of voice
guidance prompts:
1. Press MENU to enter the menu
options, then press MENU
repeatedly until Nav is selected
or press the Nav screen button.
Infotainment System
2. Press the Voice Prompt screen
for more button.
3. Press On if voice guidance is
not on.
4. Press the + or
to increase or to decrease the
volume of the voice prompts.
The system responds with the
adjusted voice level.
See Voice Prompt under
more information.
Turning the
during a voice or navigation prompt
also changes the volume.
Cleaning the Display
Use a soft clean cotton cloth
dampened with clean water.
13
screen buttons
for
(Power/Volume) knob