NETGEAR Wireless-N User Manual page 66

b. Enter the e-mail address to which logs and alerts are sent in the Send To This E-mail
Address field. This e-mail address will also be used as the From address. If you leave this
field blank, log and alert messages will not be sent by e-mail.
3. If your outgoing e-mail server requires authentication, select the My Mail Server requires
authentication check box.
a. Enter your user name for the outgoing e-mail server in the User Name field.
b. Enter your password for the outgoing e-mail server in the Password field.
4. You can specify that logs are automatically sent by e-mail with these options:
• Send alert immediately. Select this check box for immediate notification of attempted
access to a blocked site or service.
• Send Logs According to this Schedule. Specifies how often to send the logs: Hourly,
Daily, Weekly, or When Full.
– Day. Specifies which day of the week to send the log. Relevant when the log is sent
weekly or daily.
– Time. Specifies the time of day to send the log. Relevant when the log is sent daily or
weekly.
If you select the Weekly, Daily, or Hourly option and the log fills up before the specified
period, the log is automatically e-mailed to the specified e-mail address. After the log is sent,
the log is cleared from the router's memory. If the router cannot e-mail the log file, the log
buffer might fill up. In this case, the modem router overwrites the log and discards its contents.
5. Click Apply to save your settings.
So that the log entries are correctly time-stamped and sent at the correct time, be sure to set the
time as described in the next section.
Protecting Your Network
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
v1.0, January 2010
3-20