1. Manuals
  2. Brands
  3. TELES Manuals
  4. Telephone
  5. ISDN Telephone
  6. User manual

TELES ISDN Telephone User Manual

Teles fon isdn telephone
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ISDN Telephone and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TELES ISDN Telephone

Summary of Contents for TELES ISDN Telephone

  • Page 2 Introduction Welcome to the TELES ISDN family! You are now the owner of a TELES.FON. The whole family can enjoy the benefits of ISDN telephony. Telecommunications in the office is also more comfortable. • The phone is ringing and you wonder who it could be for? Now three members of the family can have their own telephone num- ber with their own special ring tone.
  • Page 3 The Telephone at a Glance Signal Tones OK tone A long beeeep. Your entry was successful and is being confirmed. Error tone A short beep. You have attempted to use a blocked or impossible function. Impossible Two short beeps. You have tone attempted to activate a function that does not work in this state.

  • Page 4: Comfortable Call Transfer

    The Telephone at a Glance The Function Keys Display Speed-dial keys F key Dial keys Subtitles: Function of the key C a llb a ck P a rk In fo C o nfe re nce w h en b usy after pressing the F key C a lle r’s...
  • Page 5 OPP 6.0. is on. Answering machine Do not disturb from OPP 6.0 is record- No calls are accepted. ing. (Only with TELES.OnlinePower- Pack) Direct call is activated. Mute Receiver is deactivated Advice of Charges Callback when busy is activated; call charges is activated.
  • Page 6 The Telephone at a Glance Standard Displays Display with receiver down. M S N 1 2 3 The first MSN is not confirmed. MSN D ate and tim e ap pear after 2-3 confirmed or not set. Followed by the first e stablished connection date and time.
  • Page 7 Function Key Combination Page <MSN 1,2 or 3> <type of call forward- Turn on/off Call Forwarding ing 1, 2 or 3>  <MSN1,2 or 3> <or>   Set Call Forwarding target call no. =next,=previous type and type of call forwarding  or  Activate/deactivate Call Waiting Accept Call Waiting or Answering...
  • Page 8 = , (volume increase on/off) = , (start volume quieter/louder) = , (ring slower/quicker) Redial  of TELES.FON for which room monitoring Calling Room Monitoring has been set  or  Turn on/off Room Monitoring <&-'or& -'>...

  • Page 10: Table Of Contents

    TELES.FON and the TELES.OnlinePowerPack answering machine ..22 TELES.FON and Information display from OnlinePowerPack ....23 Resetting to delivery state ......... . . 24 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/13.07.
  • Page 11 PC-Integrated Telephony ..........45 TELES.OnlinePowerPack (not included with the TELES.FON)... . . 45 Technical Data/General Notes .

  • Page 12: Setup And Installation

    Hold for enquiry, Hold and alternate Trace calls (Malicious Call Identification) Limitations Due to technical differences in ISDN lines of various countries not all features of your TELES.FON may be available. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 1...

  • Page 13: Setup And Installation

    1 Receiver cable 1 User’s manual Safety concerns The TELES.FON is intended for operation only on a DSS1 type ISDN access. Any other connection may not work. The TELES.FON may not be altered neither in its construction nor in its safety features without the explicit prior consent of the manufacturer.

  • Page 14: Putting Together The Telephone's Components

    Wipe phone with a slightly moist rag or better yet with an anti-static cloth. Do not use a dry cloth and any cleansing or scrubbing agents. This avoids building up electrostatic charges. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 3...

  • Page 15: Operation During Power Failure

    ISDN line, select only one of these to be able to operate under emergency power because only one device can operate in the event of a power failure. In case more than one TELES.FON is set for emergency power then the following message is displayed: The display will only appear if there are two or more TELES.FONs on...

  • Page 16: Basic Telephony Functions

    • Activated functions (e.g. advice of charges, caller’s list) are not dis- played during an incoming call. • All functions that are activated with receiver down can be interrupted directly with the -key. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 5...

  • Page 17: Dial Pad Dialing

    5 times to press the loudspeaker select one of the numbers key. dialed previously. Press the redial key (the Lift the receiver number last dialed is called). press the loudspeaker key Page 6 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 18: Caller's List Dialing

    Displaying the call num- Dialing the call number Press the redial key, if nec- Lift the receiver essary several times for the search. press the loudspeaker key ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 7...

  • Page 19: Speed-Dial Key Dialing

    The caller hears the busy tone. Mute Press the mute key during a conversation and the other party cannot hear you anymore. A renewed pressing of the mute key switches the microphone on again. Page 8 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 20: Loudspeaker

    If you have an on-hold and an active connection then only the active connection is disconnected and the telephone switches automatically to the on-hold connection. Press the -key Press the number 0 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 9...

  • Page 21: Callback When Busy

    You hear the OK tone. Put the receiver down. Once the other party hangs up, your TELES.FON rings and the connec- tion is established. If necessary two callback connections can be set up. Note: You can apply for the supplementary service “Callback when busy” at your local telephone company.

  • Page 22: Notebook Function

    They are located in the call numbers memory following the numbers saved via the redial function. The identifications “E01, E02...E05” appear in front of the notebook numbers. You can delete a displayed notebook number by pressing the -key. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 11...

  • Page 23: Caller's List With Connection Display, Date And Time

    Read about the nec- essary control signals, i.e. keys, in the device’s user manuals or listen for them in the menus of the service number. Page 12 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 24: Telephoning - Special Functions

    Note: If there already is an active and an on-hold connection on your telephone the park function won’t work. A call can be parked for up to 3 minutes. After that the switchboard terminates the connection automatically. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 13...

  • Page 25: Comfortable Call Transfer

    Telephoning - Special Functions Comfortable call transfer Your TELES.FON features a unique function to transfer calls to a fur- ther TELES.FON on the same ISDN interface. Both devices need to have different device IDs (to be set by the programming command 92...).

  • Page 26: Putting A Call On Hold (Hold For Enquiry)

    By pressing the %-key repeatedly you alternate between both calls. Note: Should the third party not answer the phone you switch back to the first connection with % or  . ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 15...

  • Page 27: Call Waiting

    Once you lift the receiver or press the -key you are connected to the waiting caller. Note: If both B channels are busy then call waiting is only possible if this is sup- ported by the ISDN switchboard. Page 16 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 28: Three-Party Conference

    (after ending the three-party conference as above) Press the -key and then the number 0. The active connection is disconnected and the conversation can then be continued with the remaining party ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 17...

  • Page 29: Room Monitoring ("Babysitting")

    Activate the room monitoring function by entering 72, your PIN and 1 (see page 33). During any incoming call the TELES.FON does not ring. The caller will just hear the sounds in the room where the phone is placed. If the connection lasts longer than 30 seconds the loudspeaker is also switched on.

  • Page 30: Information On The Last Connection

    Press the -key. Press the number 2. The call number is displayed. Press number 2 again. The connection’s duration and the call charges are displayed. Press the -key to end the display. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 19...

  • Page 31: Connections Counter

    Press the number 4. The charge units of the charge accounts are displayed. Press the -key again to end the display. Note: By entering  you can delete the charge account. Page 20 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 32: Cumulative Charges

    Press the -key and then the number 5. You hear the OK tone. " Note: The key combination sends a command to identify the caller to the appro- priate switchboard. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 21...

  • Page 33: Teles.fon And The Teles.onlinepowerpack Answering Machine

    Following the installation of TELES.OnlinePowerPack* (as of version 6.0) on your PC you posses a pick-up function for your telephone. The TELES.FON can take over a call from answering machine. The coordi- nation with your TELES.FON is done in the following manner: A call comes in that can be answered by the answering machine of the TELES.OnlinePowerPack as well as by the TELES.FON.

  • Page 34: Teles.fon And Information Display From Onlinepowerpack

    You can view information on the number of incoming calls, faxes and e-mails. e.g. 7 calls (Anr = Abbreviation for “Anrufe” which stands for calls in German) 4 faxes 1 e-mail * see TELES.OnlinePowerPack, page 45. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 23...

  • Page 35: Resetting To Delivery State

    Programming Resetting to delivery state In the delivery state the TELES.FON features the following “factory settings”: • all charges and connections counters deleted • charges factor on the display set to currency units • all MSN and call numbers deleted •...

  • Page 36: Programming

    Press the -key again. Continue your conversation or put the receiver down. Note: The set volume remains valid for future connections. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 25...

  • Page 37: Device Id

    Device ID The device ID is only needed if you operate several devices with the TELES.Family patent control on one common ISDN line or if the com- fortable call transfer is used. In the delivery state the device ID is set to 01.

  • Page 38: Pin (Personal Identification Number)

    PIN. Press the -key. Note: If you would like to do without a PIN, simply leave or set the PIN at 00000. The PIN will not be requested any more then. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 27...

  • Page 39: Display Contrast

    The call number of a caller is recorded though in the caller’s list if it comes from another ISDN extension. Press the -key. Press number 8. With a renewed pressing of $ you switch back to call acceptance. Page 28 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 40: Speed-Dial Numbers

    Programming Speed-dial numbers You can store frequently used call numbers. The TELES.FON features 3 speed-dial keys. In combination with the F key these speed-dial keys can store up to 6 call numbers. Press the -key. & Press one of the speed-dial keys for memory M1-M3;...

  • Page 41: Ring Melody And Volume

    Press -key. Note: The maximum value for increasing ring tones is identical to the standard tone set by the - or -keys. Page 30 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 42: Multiple Subscriber Number (Msn)

    Otherwise you can also de- fine the MSN to be sent (see Basic Functions - Dialing with the dialing pad.) ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 31...

  • Page 43: Call Waiting

    (see also Telephoning - Special Functions - Accepting/rejecting call waiting). Press the -key. Enter the numbers 7 and 3. Enter your PIN. Enter: to permit call waiting to prevent call waiting. Press the -key. Page 32 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 44: Room Monitoring

    Programming Room monitoring Room monitoring allows you to “listen in” to the surroundings of your TELES.FON (see also Telephoning - Special Functions - Specials room monitoring). Press the -key. Enter the digits 7 and 2. Enter your PIN. Enter: room monitoring on room monitoring off .

  • Page 45: Caller Id

    Note: During on-hook dialing you can also activate the call numbers suppression for only that call. Press the -key before dialing the call numbers. Your ISDN line must support the selective Connected Line Identification Restriction (COLR). Page 34 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 46: Charge Account

    (up to 65535). Press the -key. To delete the charge account enter the number 0 instead of the charge units. Enter number 0. Press the -key. The charge account is deleted. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 35...

  • Page 47: Charges Factor

    Programming Charges factor In the delivery state the TELES.FON shows the charges in major and minor monetary units, e.g. dollars and cents. You can choose between displaying the charges in units or as currency (see also Telephoning - Special Functions - Display charge account).

  • Page 48: Call Charges And Connections Counter

    Press the -key. Enter numbers 3 and 9. Note: The PIN is requested if needed. Press the -key. The charges recorded by other devices aren’t affected by this. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 37...

  • Page 49: Number Of Digits For The Park Id

    3 for three- to eight-digit park Press the -key. In the example a two-digit park ID has been set. See also Telephoning - Special Functions - Parking and recommencing of a call. Page 38 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 50: General Explanation Of Call Numbers Blocking

    1 for partial block 2 for global block Press the -key. In the example the partial block has been set. Note: The emergency numbers 110 and 112 are exempted from blocks. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 39...

  • Page 51: Call Numbers For The Partial And Global Block

    Note: The numbers 1, 11, 110 and 112 cannot be blocked. Call numbers from the speed-dial memory can be entered directly by simply pressing the memory keys. For M4 - M6 press the key twice instead of using the F key. Page 40 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 52: Direct Call

    Direct call can not be activated if: - the charge account is active - the partial or global block is set - no call number is stored in speed-dial memory 1. ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 41...

  • Page 53: Call Forwarding

    The various types of call forwarding are identifiable as segments in the display as following: no reply when busy unknown unconditional The types of call forwardings displayed are set individually for each MSN. Page 42 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 54: Destination Call Numbers For Call Forwarding

    The call numbers stored in the speed-dial keys memory can also be entered by pressing the speed-dial keys. To get the numbers stored un- der M4 - M6 press the speed-dial key twice since the  -key terminates programming! ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 43...

  • Page 55: Call Forwarding

    - no destination call number for the call forwarding has been entered. Several call forwarding types can be activated at the same time, e.g. call forwarding when busy and if no reply. Page 44 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 56: Pc-Integrated Telephony

    ISDN offers new possibilities for the integration of telephone and com- puter. PC-integrated telephony is also quite easy with your TELES.FON. All you need for that is an ISDN board for your PC - for example a TELES.BRI board that also comes with the appropriate soft- ware.

  • Page 57: Technical Data/General Notes

    Attachment plugs IAE plugs at both ends Licensing The TELES.FON has the approval of the German “Bundesamt für Zu- lassungen in der Telekommunikation” and fulfils the legal requirements of the EC guidelines 91/42/EC and 93/68/EC. It fulfils the requirements for the “Allgemeinen Anschalterlaubnis” and can therefore be operated on all ISDN multipoint accesses and ISDN PBXes with D channel protocol according to DSS1.

  • Page 58: Solving Minor Problems On Your Own

    Regain power or set emergency power switch to “on”. Incoming calls without call Increase ring tone vol- numbers transmission and ume. ring tone too quiet. No dialing possible Telephone blocked Remove telephone blocks ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07. Page 47...
  • Page 59 A telephone reset can help sometimes when problem do not seem to go away. Disconnect the telephone line briefly press the -key and the numbers 93. After a few seconds the display is refreshed. Page 48 ©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

  • Page 60: Hotline And Service

    Hotline and Service The TELES Hotline is available Monday to Friday from 8.30 a.m. to 6 p.m. TELES AG Phone:+49 (30) 399 28 033 Dovestraße 2-4 Fax:+49 (30) 399 28 01 10587 Berlin Support Server:+49 30 399 28 007 GERMANY World Wide Web: http://www.teles.de...

  • Page 61: Appendix

    The accompanying user manual and the hardware supplied with the program are also protected by copyright law. As sole owner of these products, TELES reserves all proprietary rights of use. Warranty / Liability 1. The Seller gives the Buyer the guarantee to remedy a defect of the TELES.FON within 6 years after delivery or, if this is impossible,...
  • Page 62 ......5 on-hook ©1998 by TELES AG Berlin, Version 1.0/fon-eu/13.07. Page 51...
  • Page 63 ......2 safety Page 52 ©1998 by TELES AG Berlin, Version 1.0/fon-eu/13.07.

This manual is also suitable for:

Teles.fon

Table of Contents