Advertisement
Quick Links
QUICK START GUIDE - WINSLOW™ PS40 PELLET STOVE
1
PURCHASING THE CORRECT FUEL FOR THE STOVE
The Winslow pellet stove has been designed to burn wood pellets. We recommend burning
Premium Grade wood pellet fuel manufactured by companies who are members of the Pellet
Fuels Institute (PFI). Although similar in appearance to those made of wood, other pelletized
fuels such as wheat, barley, cherry pits, etc. will adversely affect the performance of the stove
and may compromise safety and void warranty.
RECOMMENDED FUEL
•
PFI APPROVED
•
PREMIUM GRADE
•
LESS THAN 1% ASH CONTENT
•
LESS THAN 300 PPM CHLORIDES
WARNING
Before you set up or operate your stove, review all safety, installation,
and operation instructions in your "Installation and Operation Manual."
USING THIS GUIDE
This guide contains 5 easy steps to help you learn more about using
your new Winslow™ PS40 pellet stove. Detailed operating and cleaning
instructions are located in the "Installation and Operation Manual."
INCORRECT FUEL
•
MOISTURE DAMAGE
•
EXCESSIVE SAWDUST
•
HIGH CHLORIDE OR
ASH CONTENT
•
OVERSIZED PELLETS
(LONGER THAN 1-1/2")
•
COMMERCIAL GRADE
•
ECONOMY GRADE
PFI LOGO
•
WHEAT PELLETS
•
BARLEY PELLETS
•
BARK PELLETS
Advertisement
Related Manuals for Lennox WINSLOW PS40
Summary of Contents for Lennox WINSLOW PS40
- Page 1 QUICK START GUIDE - WINSLOW™ PS40 PELLET STOVE WARNING Before you set up or operate your stove, review all safety, installation, and operation instructions in your “Installation and Operation Manual.” USING THIS GUIDE This guide contains 5 easy steps to help you learn more about using your new Winslow™...
-
Page 2: Manual Operation
6A 250V If the flame goes out, press the “Start” button to re-ignite the stove Start Igniting Ready Feeding STOPPING THE WINSLOW PS40 PELLET STOVE High Control Fuse Ignitor Fuse Start COUNTRY Turn the control board dial to the “OFF” position... - Page 3 DAMPER ADJUSTMENT The Winslow™ PS40 pellet stove is equipped with a damper adjustment which is used to fine tune combustion. Although every unit is test burned and calibrated at the factory, periodic adjustment may be necessary at times to compensate for variables such as fuel, venting, climate, altitude, and maintenance intervals. OPENING THE DAMPER Opening the damper increases the amount of combustion air.
- Page 4 Lennox pellet-burning appliances are designed for use as • supplemental heaters. They are not intended for continuous use as primary heat sources. ©Lennox Industries Inc. 2009 Visit us at www.Lennox.com, or contact us at 1-800-9-LENNOX. P/N 506033-38 Rev. NC 10/2009...