Disc Operation - Panasonic PV-D4743 Operating Instructions Manual

Disc Operation (continued)
Random Play (Video CD/CD only)
Tracks are played in a random order.
1
Press ACTION *
to display DVD MAIN MENU.
2
DVD MAIN MENU
DISC LANGUAGES
AUDIO OUTPUT
ST I L L MODE : AUTO
TV MODE : 4 : 3 L e t t e r b o x
P A R E N T A L L O C K : L E V E L 8
PLAY MODE
SELECT :
SET : SET
END : ACTION
3
PLAY MODE
PROGRAM PLAY
RANDOM PLAY
SELECT :
SET : SET
END : ACTION
Setting the VOLUME ADJUST
Some DVDs are recorded in lower than average volume levels.
For these DVDs, this DECK can be set so that the average
volume is increased.
Press VOL.ADJ repeatedly to change "ON" ↔ ↔ ↔ ↔ ↔ "OFF."
• "ON" or "OFF" lights up on Multi Function Display (about 3 seconds) when
press VOL.ADJ.
Some DVD
[Volume level is low]
• "ON" is set ..... When a DVD is played back, the average volume is increased.
• "OFF" is set .... The volume level recorded on the disc is played back just as it is.
Notes
• This feature is available only for Dolby Digital sound tracks.
• When audio equipment is connected, setting the Sound Output level to "OFF" is recommended.
• If the sound becomes abnormal while playing a disc, set the Sound Output level to "OFF."
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
40
D4743-4743S P36-60 (030318 C-lot).p65
Press
to select "PLAY MODE,"
and
press SET
to display.
Press
to select
"RANDOM PLAY," and
press SET
to begin random play.
• To cancel, press STOP
during play, then press
CLEAR .
VOLUME ADJUST "OFF"
Volume is the original level.
40
Ready Checklist
DECK is in DVD mode, press DVD.
*Important:
If a remote control button does not
work when pressed, press the
DVD button on the remote and try
the button again.
CLEAR
ACTION
SELECT
SET
STOP
VOLUME
ADJUST
VOLUME ADJUST "ON"
Volume level is increased
when played back.
2003/03/18, 15:28