Receive Polling (Retrieving A Fax Placed On Another Fax Machine); Junk Fax Prohibitor (Preventing Fax Reception From Undesired Callers) - Panasonic KX-MB1500HX Operating Instructions Manual

6. Fax (KX-MB1520/KX-MB1530 only)
– the fax activation code (feature #434 on
page 58)
Note:
R If the call is a phone call, the answering machine will
record voice messages.
If a fax calling tone is detected, the fax machine will
receive a fax automatically.
R Regarding the remote access code for the answering
machine, see the operating instructions of the
answering machine.
Receiving a voice message and fax document in one
call
The caller can leave a voice message and send a fax
document during the same call. Inform the caller of the
following procedure beforehand.
1. The caller calls your unit.
R The answering device will answer the call.
2. The caller can leave a message after the greeting
message.
3. The caller presses MGN MBN M9N (pre-selected fax
activation code).
R The unit will activate the fax function.
4. The caller presses the start button to send a
document.
Note:
R To use this feature, make sure remote fax activation
is turned ON (feature #434 on page 58). The fax
activation code can also be changed.
R If there is no room left in the memory of your
answering machine, the unit may not be able to
receive documents. See the operating instructions of
the answering machine and erase unnecessary
messages.
6.9 Receive polling (retrieving a
fax placed on another fax
machine)
This feature allows you to retrieve a document from
another compatible machine. Therefore you pay for the
call.
R Make sure that the other party's machine is ready for
your call.
R Make sure that no documents are fed into your unit's
automatic document feeder (KX-MB1530 only).
1
Press MMenuN repeatedly to display "POLLING".
A MSetN
2
Dial the fax number. A MStartN
46
6.10 Junk fax prohibitor
(preventing fax reception from
undesired callers)
If you subscribe to Caller ID service (page 48), this
feature prevents fax reception from calls that do not show
caller information.
Additionally, the unit will not accept faxes originating from
numbers that match the ones on a programmable junk
fax prohibitor list.
Important:
R This feature does not work if you receive faxes
manually.
6.10.1 Activating the junk fax prohibitor
1
Press MMenuN repeatedly to display "JUNK FAX
PROH.". A MEN
2
Press MCN or MDN repeatedly to select "ON". A
MSetN
3
Press MStopN to exit.
6.10.2 Storing undesired callers
You can register up to 20 undesired numbers from the
Caller ID list (page 48) if you do not wish to receive
faxes from them.
1
Press MMenuN repeatedly to display "JUNK FAX
PROH.".
2
Press MEN repeatedly to display "JUNK LIST
SET". A MSetN
3
Press MCN or MDN repeatedly to display the party you
do not want to receive faxes from. A MSetN
4
Press MStopN 2 times to exit.
To display the junk fax prohibitor list
1. Press MMenuN repeatedly to display "JUNK FAX
PROH.".
2. Press MEN repeatedly to display "JUNK LIST
DISP.". A MSetN
3. Press MCN or MDN to display the items on the list.
4. Press MStopN to exit.
To print the junk fax prohibitor list
1. Press MMenuN repeatedly to display "JUNK FAX
PROH.".
2. Press MEN repeatedly to display "JUNK LIST
PRINT". A MSetN
3. Press MStopN to exit.
To erase an item from the junk fax prohibitor list
1. Press MMenuN repeatedly to display "JUNK FAX
PROH.".