Cassette Tapes - Panasonic SC-PM18 Operating Instructions Manual

Cd stereo system model no. sc-pm18
Table of Contents

Advertisement

OPEN
1
2
TAPE
3
VOLUME
DOWN
UP
1
OPEN
2
3
Insert inside the
guides
Forward side

Cassette tapes

1
Press [c OPEN], insert a cassette with the
tape facing in.
When the button is pressed, the unit comes on
automatically. Make sure the cassette is fully inserted
and close the lid by hand.
2
Press [TAPE -] to start playback.
One side is played, then playback stops automatically.
To play on the other side of the tape, turn the tape over
and press [TAPE -].
3
Adjust the volume.
To stop tape playback
Press [STOP L, –DEMO].
One-touch play
When the system is OFF and a tape is already inserted, play
starts automatically when you press [TAPE -].
Cassette tape selection and care
Use normal position tapes.
High position and metal position tapes can be played, but
the unit will not be able to do full justice to the characteristics
of these tapes.
• Tapes exceeding 100 minutes are thin and can break or
get caught in the mechanism.
• Tape slack can get caught up in the mechanism and
should be wound up before the tape is played.
• Failure to operate endless tapes correctly may cause the
tape to wind around the revolving parts. Always read the
instructions provided with your tapes.
17
RQT6686

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents