1. Manuals
  2. Brands
  3. TEQ Manuals
  4. Projector
  5. Z900
  6. User manual

TEQ Z900 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TEQ-Z900 Projector
User's Manual (concise)
Thank you for purchasing this product. Please read the manual to ensure proper safety and
operation.
WARNING
Before using this product, be sure to read the entire manual.
n
Heed all the warnings and cautions in the manual or on the product.
n
Follow all the instructions in the manual or on the product.
n
Retain the manual in a safe place for future reference.
n
Contents
Checking the contents. . . . . . . . . . . . . . . 2
Arrangement . . . . . . . . . . . . . . . . . . . . . . 3
Connecting your devices . . . . . . . . . . . . . 5
Connecting the power supply . . . . . . . . . 6
Using the cable cover . . . . . . . . . . . . . . . 8
Preparing the remote control . . . . . . . . . 9
Starting the projector . . . . . . . . . . . . . . 10
Operation. . . . . . . . . . . . . . . . . . . . . . . . 12
Turning off the projector . . . . . . . . . . . . 13
Replacing the lamp . . . . . . . . . . . . . . . . 14
Maintaining the air-filter . . . . . . . . . . . . 17
Replacing the clock battery. . . . . . . . . . 19
Regulatory notices . . . . . . . . . . . . . . . . 20
Troubleshooting . . . . . . . . . . . . . . . . . . . 22
Specifications . . . . . . . . . . . . . . . . . . . . 23
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z900 and is the answer not in the manual?

Questions and answers

Related Manuals for TEQ Z900

Summary of Contents for TEQ Z900

  • Page 1: Table Of Contents

    TEQ-Z900 Projector User’s Manual (concise) Thank you for purchasing this product. Please read the manual to ensure proper safety and operation. WARNING Before using this product, be sure to read the entire manual. Heed all the warnings and cautions in the manual or on the product.

  • Page 2: Checking The Contents

    CheCking the Contents Make sure all the following items are included. If any items are missing, contact Teq. (1) Projector (2) Remote control with two batteries (3) Power cord (4) Computer cable (5) Cable cover with a screw (6) Security label WARNING Keep all original packing materials for future shipment purposes.

  • Page 3: Arrangement

    Refer to the following to decide the projection style. Ceiling mount and tabletop use must be setup with the designated optional accessories. Ask Teq for details. note When installing the projector, make sure there is nothing blocking the projection light.
  • Page 4 ArrAngeMent (ContinUed) note It is recommended to adjust the screen size from 60 inch to 100 inch diagonal. A screen image adjusted out of this range, either smaller or larger, may be deteriorated. WARNING Install the projector under the specified condition using only the specified accessory, since others may cause hazards.

  • Page 5: Connecting Your Devices

    Refer to the following for connection: WARNING Only use the accessories contained in this product or recommended by Teq. Do not modify the projector or accessories. For the cable with a ferrite core only at one end, connect the end with the core to the projector.

  • Page 6: Connecting The Power Supply

    Do not overload the outlet, since overloading may result in a risk of fire or electric shock. Only use the power cord included with this product. If it is damaged, contact Teq to get new one. Do not modify the power cord.

  • Page 7: Using The Security Bar And Slot

    Using the seCUrity bAr And slot This projector has a security bar for a commercial anti-theft chain or wire up to 10 mm in diameter, and the security slot for the Kensington lock. note These are not provided as comprehensive theft preventions, but as supplemental measures.

  • Page 8: Using The Cable Cover

    Using the CAble Cover Utilize the cable cover as the guard and blind for the connecting parts. 1. Connect the signal cables and the power cord to the projector first. 2. Attach the cable cover to the projector, uniting the interlocking parts.

  • Page 9: Preparing The Remote Control

    prepAring the reMote Control The remote control runs on batteries. Use the batteries included in this product or two new batteries. 1. Remove the battery cover in the back of the remote control. 2. Put the batteries into the battery holder, according to the polarity markings (+) and (-) inside the holder.

  • Page 10: Starting The Projector

    stArting the projeCtor Turn on the projector before the connected devices, unless mentioned in the manuals. For this projector, follow the procedure below: 1. Press the side marked “ i “ of the power switch. The power indicator will light up in orange. note After the power indicator lights up, wait a few seconds before using the control buttons.

  • Page 11: Adjusting The Projection Position

    AdjUsting the projeCtion position There are four elevator feet located on the bottom of the projector. Use them to adjust the projection position. CAUtion Do not lengthen the elevator feet to 43 mm or more. A foot lengthened beyond the limit may detach from the projector, and result in an injury.

  • Page 12: Operation

    operAtion displAying And switChing the iMAge Press the inpUt button on the projector to display the image from one of the active input ports. Each time you press the button, the port will switch, when two or more signals are inputted.

  • Page 13: Turning Off The Projector

    For cooling the projector down, wait for the power indicator to turn steady orange. The projector can be turned off without waiting for the cool down. However, Teq recommends cooling the projector down sufficiently. Do not turn on the projector for about 10 minutes or more after turning it off, to prevent shortening its life.

  • Page 14: Replacing The Lamp

    Using the lamp for long periods of time may cause the lamp to burn out or break. Preparation of a spare lamp and early replacement are recommended. To prepare the new lamp, contact Teq with the type number: dt00891 1. Turn off the projector and unplug the power cord from the power outlet.
  • Page 15 (1) Press the  or  button on the projector or the MenU button on the remote control. The “EASY MENU” will appear. (2) Point at the “Go to Advanced Menu …” in the menu using the  or  button, then press the ...
  • Page 16 If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from Teq. Note that shards of glass may damage the projector’s internals, or cause injury during handling, so do not try to clean the projector or replace the lamp yourself.

  • Page 17: Maintaining The Air-Filter

    When it is damaged or too soiled, replace the filter unit. To prepare the new filter unit, call Teq with the type number: Qd60122 1. Turn off the projector and unplug the power cord from the power outlet. Then, let the projector cool down sufficiently.

  • Page 18: Caring For The Mirror And Lens

    CAring For the Mirror And lens If the projection mirror or lens is flawed, soiled or fogged, it may cause deterioration of display quality. Please take care of the mirror and lens, by following this procedure: 1. Turn off the projector and unplug the power cord from the power outlet.

  • Page 19: Replacing The Clock Battery

    replACing the CloCk bAttery This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try replacing the battery: 1. Turn off the projector and unplug the power cord from the power outlet.

  • Page 20: Regulatory Notices

    - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from the receiver. - Consult Teq or an experienced radio/TV technician for help. instrUCtions to Users: in the Us This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that the following conditions are met: Some cables have to be used with the core set.
  • Page 21 This symbol on the product or on its packaging means that your electrical and electronic equipment should be disposed at the end of life separately from your household wastes. There are separate collection systems for recycling in EU. For more information, please contact the local authority or Teq.

  • Page 22: Troubleshooting

    If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise, if a problem occurs with the projector, contact Teq.

  • Page 23: Specifications

    LAN ....RJ45 x1 Optional Parts Lamp: DT00891 Filter unit: QD60122 Tabletop use kit: TT100 Soft case: CA100 For more information, contact Teq. Weight (mass) 5.8 kg (approx.) Size 397 (W) x 131 (H) x 356 (D) mm (See below.)

This manual is also suitable for:

Teq-z900

Table of Contents