One Stop Gardens 95690 Assembly And Operating Instructions Manual page 6

3. Make sure the Pump Handle (43) is in its down position. Next, turn the Pump
Handle counterclockwise to loosen. Then, pull Pump Handle up and out of
the Container (31). (See Figure A.)
4. Fill the Tank with up to 2 gallons of liquid (for model 95690) or 1.25 gallons
(for model 95692). Then, insert the Pump Handle back into the Container and
turn the Pump Handle clockwise to secure it in place. (See Figure A.)
SAFETY RELEASE VALVE
FIGURE A
5. NOTE: The Sprayer is heavy when completely filled with liquid. Always get
assistance when strapping the Sprayer onto your body. If necessary, adjust the
Belt (28) for comfort. (See Assy. Diagram.)
6. Always make sure other adults, children, and animals do not have access to the
area(s) in which you intend to chemically treat.
7. Pump the Pump Handle (43) to build up sufficient pressure in the Sprayer sys-
tem. Once the system is pressurized (as indicated by an increased tension on
the Pump Handle), you may discontinue pumping the Pump Handle.
(See Figure A.)
8. Point the Nozzle of the Spray Gun Assembly toward the area to be sprayed.
Then, squeeze the Lever (8) on the Spray Gun Assembly to begin spraying.
(See Figure B.)
SKU 95690-95692
(20)
LEVER
(8)
FIGURE B
For technical questions, please call 1-800-444-3353.
PUMP HANDLE
(43)
CONTAINER CAPACITY:
MODEL 95690 = 2 GALLONS
MODEL 95692 = 1.25 GALLONS
(DO NOT OVERFILL)
CONTAINER
(31)
PAGE 6