Page 1
- - - track PROGRAM TRACKS INDEX TOTAL TIME REM cd transport CDT20R 0 2 w e l c o m e power remote control window 0 8 k e y f e a t u r e s...
Page 2
. . i n h i - p e r fo r m a n c e , h i - f i d e l i t y TAG McLaren Audio has been created with All TAG companies perpetually strive...
Page 3
Thank you for purchasing the TAG McLaren Audio cd transport CDT20R. missing data.The last 10 years have shown In the CDT20R, the digital data stream that this assumption is an over- coming from the CD transport is available simplification.
Page 4
To minimise any corruption of data data stream to provide accurate timing. sequence.You can also edit the program being read from the CD, the CDT20R after you’ve entered it. has a heavy-duty transport mechanism high-quality circuitry and the laser, which reads the data from The circuits in the CDT20R are ‘no-...
CDT20R functions • Operation by front panel or remote control • Remote control also operates selected TAG McLaren Audio F3 Series amplifiers and preamplifiers • Microprocessor control with computer logic to prevent damage and reduce the number of key presses 1.
CDT20R to an AC supply outlet. For the best sound 5. If there is already a CD in the CDT20R then, after a few seconds, the display will show the number of tracks and the total playing time of the CD quality, we recommend that you do not use multi-plug adaptors.
first track and go on to the end of the CD. If you press play while a track is playing, the CDT20R will return to the 1. Some buttons have special functions when pressed for more than two seconds beginning of the track and start playing it again.
Press the index + button to go to the start of the next index index 1. If you press track + while the CD is stopped, the CDT20R will go to track 2 and play it. Press index – for the previous index. If a track includes start playing from there.
Now go to the end of the section using the track or search button and press the a-b button again. The display will now show A - B and the CDT20R will return to the start of the section and keep repeating it.
2 - The display shows the amount of time remaining on the current track. The words TIME REM are also displayed. In order to store and play a program, your CDT20R has to be in entering 3 - The display shows the amount of time remaining on the CD.
Page 11
See page 15 for more information on the use of the numeric keys for direct entry 2. The cumulative time shown on the CDT20R’s display is taken from the table of contents information, and includes the pause between each track. Because the...
Page 12
You can change your stored program at any time. To do this, the time display TIME and TOTAL TIME REM refer to the stored program. CDT20R has to be in program mode. If you are not in program mode, press the stop button for at least two seconds. hold for at least...
Page 13
AES/EBU connection, then the coaxial SPDIF via a phono connector . All the outputs are on the back of your CDT20R. Please ask your retailer for advice on selecting the best output open/close Go to the step you want to erase. Press the open/close button format.
Page 14
An XLR socket is provided for this output. Just like a high-quality car, the performance of your CDT20R will running in XLR connectors are latched so you will hear a click when the plug improve during the first few hours of operation.
There is a fuse in the power socket on the back of your CDT20R. The only service you should do to your CDT20R is described on fuses service To change the fuse, unplug the power cable and pull out the fuse the left.
This section is for those of you who really want to know the ‘insides’ 30 ns nominal digital output rise of your CDT20R. You will not miss out on any of the functions or and fall times performance of your CDT20R if you choose not to read any further.
Your CDT20R meets or exceeds all the legal requirements listed below: 89/336/EEC EMC Directive (as amended by 93/23/EEC) directives 73/23/EEC Low Voltage Directive (as amended by 93/23/EEC) 21CFR §1010 FDA rules (USA) IEC65: 1985 IEC65 A2: 1989 safety...