Panasonic SC-HT892 Operating Instructions Manual page 27

QUICK SETUP enables successive settings of the items in the shaded area.
∫ "Video" tab
TV Aspect
Choose the setting to suit your
television and preference.
TV Type
Select to suit the type of television.
Time Delay
When connected with a Plasma
display, adjust if you notice the audio is
out of sync with the video.
Still Mode
Specify the type of picture shown
when paused.
NTSC Disc Output
Choose PAL 60 or NTSC output when
playing NTSC discs (➜ page 15,
Video systems).
Picture/Video Output
Change the video signal format to be
output for JPEG, MPEG4 and DivX
video if picture output is not smooth
during playback.
∫ "Audio" tab
§
Dolby Digital
8
§
DTS Digital Surround
8
§
MPEG
7, 8
Dynamic Range Compression
∫ "HDMI" tab
RGB Range
Set "HDMI Color Space (or HDMI
Colour Space)" to "RGB" (➜ page 24,
Picture Menu).
Video Output
(This setting is irrelevant when
connected through the VIDEO OUT or
S-VIDEO OUT terminal.)
Audio Output
Control with HDMI
(HDAVI Control)
§5
Refer to "Frame still and field still" (➜ page 38, Glossary).
§6 [Southeast\Asia\
§7 [The\Middle\East,\South]Africa,]Saudi[Arabia[and[Kuwait[
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
≥ Standard (Direct View TV)
≥ Projection TV
≥ 0ms ≥ 20ms
≥ Automatic
≥ Field §5
: The picture is not blurred, but picture quality is lower.
≥ Frame §5
: Overall quality is high, but the picture may appear blurred.
≥ PAL60: When connected to a PAL television.
≥ NTSC: When connected to an NTSC television.
([The\Middle\East,\South]Africa,]Saudi[Arabia[and[Kuwait[: "PAL60" is the factory preset.)
≥ NTSC/PAL60:
§6
Output will depend on "NTSC Disc Output" setting (➜ above).
≥PAL
§7 ≥ Automatic ≥ PAL
≥NTSC/PAL60:
Output will depend on "NTSC Disc Output" setting (➜ above).
≥ Bitstream
Select to suit the type of equipment you connected to the HDMI AV OUT
≥ PCM
terminal (➜ page 10).
≥ Bitstream
Select "Bitstream" when the equipment can decode the bitstream (digital form
≥ PCM
of multi-channel data). Otherwise, select "PCM".
≥ PCM (If the bitstream is output to the equipment without a decoder, high levels of
≥ Bitstream noise can be output and may damage your speakers and hearing.)
≥ Off
≥ On: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound level
and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
≥ Standard
≥ Enhanced: When the black and white images are not distinct.
≥ On: When connected through the HDMI AV OUT terminal. Video is output from the HDMI terminal.
Video is also output from the COMPONENT VIDEO OUT terminal, but only in 480p or 576p
(progressive).
≥ Off: When connected through the COMPONENT VIDEO OUT terminal. Video is not output from the
HDMI AV OUT terminal, but from the COMPONENT VIDEO OUT terminal according to the setting
of the "Video Output Mode" (➜ page 23, Picture Menu).
≥ On: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the
connected equipment, audio output may differ from the audio settings of the main unit.)
≥ Off: When audio output is not from the HDMI AV OUT terminal. (The audio is output using the settings of
the main unit.)
≥ On: The HDAVI Control function is available (➜ page 34).
≥ Off
≥ CRT Projector
≥ Plasma TV
≥ 40ms ≥ 60ms
§8
When audio is output from HDMI AV OUT terminal, and the connected
equipment does not support the item selected, the actual output will
depend on the performance of this connected equipment.
≥ LCD TV/Projector
≥ 80ms ≥ 100ms
(Continued on next page)
27