Table of Contents
Advertisement
For setting, see page 23.
Menu
6 BEEP
B SHUTTER
9 VOLUME
3 CLOCK SET
2 NO.RESET
1 RESET
4 USB MODE
Y HIGHLIGHT
Set to select the volume of operational sound.
[7 ]: No operational sound
[8 ]: Soft operational sound
[9]: Loud operational sound
Set to select the volume of shutter sound.
[C]: No shutter sound
[E]: Soft shutter sound
[D]: Loud shutter sound
The volume of speakers can be adjusted in 7 steps. (LEVEL6 to 0)
• When you connect the camera to a TV, the volume of the speakers
of the TV is not changed.
Change date and time. (P22)
Set this when you want to start the file number of the picture from
0001 on the next recording. (The folder number is updated, and the
file number starts from 0001.)
• The folder number can be assigned from 100 to 999.
When the folder number reaches 999, it cannot be reset. We
recommend formatting the card after saving the data on a PC or
elsewhere.
• To reset the folder number to 100, you must first reformat the card
(P103). After this perform [NO.RESET] to reset the file number,
after which a screen appears asking whether you want to reset the
folder number. Select [YES].
• For details about file and folder numbers, see page 107.
The settings on the recording or the [SETUP] menu are reset to the
initial settings.
• The folder number and the clock setting are not changed.
• Your baby's birthday (set in [BABY] scene mode (P65)) is cleared.
[ROTATE DISP.] (P93) is reset to [ON].
Set the USB communication system. Set before connecting to a PC
or a printer. (P105)
When the auto review or review function is activated, a white
saturated area appears blinking in black and white. (P28)
Preparation
Functions
25
VQT0S34
Advertisement
Table of Contents
