Download Print this page

Harbor Freight Tools 92987 Assembly And Operating Instructions page 4

Small sit or stand walker with hand brake

Advertisement

2.
Pull up on the Backrest Bar (6) to make certain that it is securely locked into place.
Hang the Basket (9) from the bar located direclty beneath the Plastic Seat (1) and rest the fitted
bottom of the Basket (9) onto the bar at the bottom of the Walker.
Once the Walker is completely assembled, test it to make certain that it folds and unfolds
properly, that the wheels roll, and that the brakes work. Make certain that it is stable and that
all hardware is securely tightened.
1.
To slow down or stop temporarily, squeeze the Handgrip (3) and the Brake Loop (2) together
firmly.
Figure 1
Handle (10)
Knob (22)
2.
To lock the 6" Wheels (18) in place, with your foot push down on the Brake Lock (12) over
each rear 6" Wheel (18). Make certain that the Brake Lock (12) is securely in place and that
the 6" Wheels (18) are securely locked.
3.
To unlock the 6" Wheels (18), release the tab on each Brake Lock (12) with your foot.
4.
The Rollator Walker is easily collapsible when you want to take it in the car, on an airplane, or
for other storage purposes. Simply remove the Basket (9) and pull up on the grip opening
on the Plastic Seat (1).
To unfold the Rollator Walker, place all of the 6" Wheels (18) on the ground and push down on
the Plastic Seat (1) until the Walker fully opens. Make certain that the Walker is stable before
using it.
Warning :
This Walker should only be used by a person who needs some assistance while
walking. Responsible adult supervision is required if the user is unstable and
especially when the user is getting in and out of the seat.
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR
SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR
HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 92987
Attaching the Basket (9)
Operation
Collar (21)
Front Frame (20)
PLEASE READ THE FOLLOWING CAREFULLY
For technical questions please call 1-800-444-3353.
Figure 2
Pin
Bolt (8)
Page 4

Advertisement

loading