Specifications; Setup Instructions; Battery Installation - CEN-TECH 97245 Set Up And Operating Instructions Manual

Battery Requirements
Sensitivity
Display
Power Switch
Feature
Operating Temperature
When unpacking, make sure item is intact and undamaged. If parts are missing
or broken, call Harbor Freight Tools at the number shown on the cover of this manual.
read the entire iMportant SaFetY inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
1. This item is shipped with the battery installed.
2. To replace battery, slide open battery com-
partment cover on back of tool.
3. Remove battery terminal connector and
remove dead battery.
4. Replace battery being sure to correctly align
battery leads with battery polarity markings.
5. Replace battery compartment cover
. Properly dispose of all used batteries.
SKU 97245 For technical questions, please call 1-800-444-3353.

SpeciFicationS

Standard 9VDC "radio" battery
Adjustable using rotary switch
Audible warning
Push/Release Button
Bright White LED Spotlight
-15° to 129° F
Relative Humidity less than 80%
unpacKing
list of contents
description
Hand Held Metal Detector
9VDC Battery
Carrying Case
Set up inStructionS

Battery installation

Q'ty
1
1
1
Page